Analysis of Tensile Strength of Bamboo Reinforced Polyester Composite
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2016, Vol 23, Issue 1
Abstract
Nigerian grown species of bamboo called bambusa vulgaris which was examined to analyze its tensile strength. The fibre characteristics and tensile strength were investigated at three different fibre lengths and fibre loadings i.e 10, 30,50mm and 10, 30, 50 wt.% respectively. Fibre length was varied in each fibre loading from 10mm to 50mm, the tensile strength of the three different series of composites varies from 28.32Mpa to 38.10Mpa. The predicted optimum tensile strength is 44.51Mpa. Generated results have been validated by the confirmation of experiments at three replications, when the control factors were set at 30mm and 30% wt or (level 2, level 2), using Taguchi’s design of experiments approach. It was observed from the analysis of variance of the samples that there is a variation in the increase of tensile strength of the bamboo that are dependent on the fibre length and fibre loading used. The percentage contributions of parameter according to the pooled ANOVA for signal-to- Noise ratio showed that the fibre length (36.61%) in controlling variation and mean strength is significantly smaller than the fibre loading (44.15%).
Authors and Affiliations
Omholua Anthony Omokhudu, A. J. Ujam, Uviesherhe Okiemute Edijana
Waste Minimization Strategy and Technique: Towards Sustainable Waste Management
Generally, sustainable waste management aids construction key players to diminish and making better use of material on their construction project. The waste minimization strategy is not only implemented during the constr...
Structural Considerations on Fatigue Cracks
This paper has been focused on the modern theoretical and experimental investigations on fatigue of metals which are now largely concentrated on three important areas: fatigue crack nucleation, short crack growth and lon...
The Mechanism for Actuating and Automating the Shaking Tables
In the paper, is present the shaking table designed for the laboratory use, to simulate the earthquakes behaviors. With this equipment we can study the dynamic behavior of civil engineering structures subjected to seismi...
Designing a Transcode of B.C.D. in S.B.C. and Study its Function Using Software Electronic Workbench
The transcoder we have set out to synthetize and to simulate in this paper is important due to the fact that it brings into discussion and also presents the family of weighted and unweights binary decimal codes, presente...
Comparative Study on the Cavitation Erosion Resistance Experimental Results of Some Steels Tested through the Cavitation Indirect Method
This paper presents the experimental results of cavitation erosion re-search regarding the resistance of some steels. So, the cavitation erosion researches involve tests of hours for each test. These results are in tabu...