Analysis of the Behavior of a Cross-Type Hydraulic Outrigger and Stabilizer Operating Under Determined Loads
Journal Title: Engineering Perspective - Year 2021, Vol 1, Issue 1
Abstract
In this study, behavior of a fully opened cross type hydraulic outrigger and stabilizer of an aerial ladder fire-fighting device which is on determined static load is analyzed. This hydraulic outriggers and stabilizer are designed via SOLIDWORKS 2017 software and then analyzing process is run at SIEMENS NX 11.0 NASTRAN software. The location of the center of gravity of the firefighting device and its mass at several use cases is used as input for analy-sis. Standard equipment’s which can work with harmony are chosen for model, since design of a commercially pro-ducible model is aimed. Stress, strain values and forces acting on mills are obtained by analysis and then interpreted. When displacement of mass against gravity is -13 mm, displacement of outrigger and stabilizers system is ±4. The maximum stress at system is obtained as 190 MPa when singular values are filtered. Factor of safety is determined as 1,9 for this system. The system is decided as durable according to this study.
Authors and Affiliations
Mustafa Karaman, Emre Öztürk
Keywords
Related Articles
- EP ID EP693643
- DOI http://dx.doi.org/10.29228/sciperspective.49248
- Views 162
- Downloads 0
Combustion, Performance and Emissions of Ethanol n-Heptane Blends in HCCI Engine
The aim of this study was to investigate the effects of the ethanol on combustion, performance and emission charac-teristics of a single cylinder, port fuel injection HCCI engine was investigated. 15% ethanol and 85% n-h...
Modeling the Vehicle Movement and Braking Effect of the Hydrostatic Regenerative Braking System
In this study, the main elements of a hydrostatic regenerative braking system have been modeled. The model which has been created, the elements in the system and the relationship of the system with the vehicle has been s...
Analysis of the Behavior of a Cross-Type Hydraulic Outrigger and Stabilizer Operating Under Determined Loads
In this study, behavior of a fully opened cross type hydraulic outrigger and stabilizer of an aerial ladder fire-fighting device which is on determined static load is analyzed. This hydraulic outriggers and stabilizer ar...
Investigation of the use of fuel cell hybrid systems for different purposes
With the increase in global energy demand, air pollution becoming uncontrollable does not fall off the agenda. It is inevitable to use and spread of renewable energy sources to make energy production cleaner, more reliab...
Response Surface Method Based Optimization of the Viscosity of Waste Cooking Oil Biodiesel
In this study, biodiesel fuel production from waste sunflower oil and viscosity optimization was carried out. Dur-ing the production process, catalyst ratio, alcohol ratio and reaction temperature were determined as vari...