ANALYSIS OF THE IRREGULARLY SAMPLED SIGNALS ABOVE THE NYQUIST LIMIT
Journal Title: Metrology and Measurement Systems - Year 2006, Vol 13, Issue 3
Abstract
A new method of spectrum analysis of the nonuniformly sampled data above the Nyquist limit is proposed, which is based on the digital spectral shift to the baseband, optional filtering and the subsequent spectrum analysis below the Nyquist limit. The method is distinguished by low aliasing frequency estimation and sufficient computation effectiveness. The mathematical background is shown and simulation results are presented to illustrate the method basics.
Authors and Affiliations
RUMEN ARNAUDOV, ROSSEN MILETIEV
A NEURAL NETWORK BASED SYSTEM FOR SOFT FAULT DIAGNOSIS IN ELECTRONIC CIRCUITS
The paper considers the architecture and the main steps of development of a neural network based system for diagnosis of soft faults in analog electronic circuits. The definition of faults of interest, selection of an op...
LINEARITY ERROR AS COMPONENT OF A/D CONVERTER UNCERTAINTY
Analog-to-digital (A/D) converters are basic elements of measuring chains since they deliver measurement data being a carrier of digital information in measurement instruments and systems. Taking into account that the qu...
MICROWAVE ABSORPTION (MMMA) - A CONTACLESS METHOD TO STUDY SUPERCONDUCTORS AND MAGNETIC NANOSTRUCTURES
Magnetically Modulated Microwave Absorption (MMMA) is a sensitive differential method to study magnetoresistence related to the voltage fluctuation in nonhomogeneous superconducting systems with Josephson junctions (JS)...
PARTICULARITIES OF THE CYCLIC A/D CONVERTERS ENOB DEFINITION AND MEASUREMENT
The paper is devoted to the methods of accurate assessment and analysis of the expected and actual effective number of bits (ENOB) of cyclic analog-to-digital converters. The equivalence of definition of ENOB in the IEEE...
MEASUREMENT UNCERTAINTY CONTRIBUTION TO THE MLP NEURAL NETWORK LEARNING ALGORITHM APPLIED TO AERODYNAMIC EXTERNAL BALANCE CALIBRATION CURVE FITTING
The aim of this study is to fit a calibration curve to a multivariate measurement system considering uncertainty in load measurements. The experimental data are generated from the calibration of the aerodynamic external...