ANALYSIS OF THE PROPERTIES OF NEW GROUPS OF COATINGS APPLIED IN HIGHLY LOADED MACHINE COMPONENTS
Journal Title: Scientific Journals of Silesian University of Technology. Series Transport - Year 2014, Vol 2014, Issue 82
Abstract
The paper presents an overview of new groups of tribological coatings with complex microstructure deposited by PVD (Physical Vapour Deposition) and CVD (Chemical Vapor Deposition) techniques. The results of microstructure studies (TEM), mechanical and tribological properties of nanocomposite coatings nc-Cr2C/a-C:H and multilayers 16x(Ti/TiN) were shown. The properties of these modern coatings are compared with the properties of two single coatings a-C:H and TiN. All coatings were deposited by magnetron sputtering on AISI 304 steel substrates. The hardness, elastic modulus and adhesion to the substrate studied by scratch testing were compared. The results showed the possibility of improving the wear resistance of the nanocomposite and multilayer coatings in comparison with conventional single coatings currently used in the machine industry.
Authors and Affiliations
Kinga CHRONOWSKA, Marcin KOT, Łukasz MAJOR
Keywords
Related Articles
- EP ID EP157549
- DOI -
- Views 39
- Downloads 0
THE DISTINGUISH VEHICLE GROUPS SPEED ANALYSIS ON ROUNDABOUTS
The results of research of distinguish vehicle groups speeds on roundabouts have been presented in his article. The vehicles speeds on roundabouts depends on geometrical parameters and on vehicle traffic volumes on parti...
HAZARD IDENTIFICATION METHODS
This article presents the main hazards that occur in the context of inland navigation and their impact on the vessel. First, characteristics are extracted from the following methods with regard to identifying threats: in...
TRANSPORT OF DANGEROUS GOODS BY ROAD FROM A EUROPEAN ASPECT
Transport plays an important role in national economies and impacts on economic development. The scale of the transportation of goods that may be dangerous to humans and the environment is expanding every year. Overall,...
KINEMATICS FRICTION PAIR FOR EXAMPLE NEEDLE BEARINGS
The present study concerns certain phenomena that take place in the needle roller bearing. The friction that generates the anti-torque of a friction pair is the major factor that influences the needle bearing’s wear. In...
THE EFFECTS OF BLENDING DIMETHYL ETHER WITH LPG ON ENGINE OPERATION AND EFFICIENCY
This paper present is continuing of research programme about gaseous fuels combustion activators which are used for vehicle feeding. The article presented chosen vehicle dynamic parameters gained by mixing LPG and DME fo...