ANALYSIS OF THE TEMPERATURE VALUE IN CONTACT STEEL – SOIL MATERIAL IN RELATION TO THE TYPE OF CONSTRUCTION MATERIAL
Journal Title: Tribologia - Year 2018, Vol 279, Issue 3
Abstract
The article presents a study of the friction temperature at the contact soil soil-material. For the tests, samples of 38GSA steel padded with El-Hard 63 electrode and Hardox 600 steel were selected. The experiment was carried out in laboratory conditions using the “rotating bowl” method in two soil types with different humidity. For light soil abrasive, the change in humidity increased the mass consumption in the wet soil almost twice for Hardox 600 steel and 1.5 times for the steel 38GSA welded. However, in the middle soil, the 38GSA steel was characterized by a higher wear value. The research shows that there were significant differences in consumption between the tested materials.<br/><br/>
Authors and Affiliations
Jerzy NAPIÓRKOWSKI, Magdalena LEMECHA
Keywords
Related Articles
- EP ID EP403196
- DOI 10.5604/01.3001.0012.7016
- Views 49
- Downloads 0
ANALYSIS OF FRACTURE OF THIN CERAMIC AND CARBON COATINGS BY MODELING AND INDENTATION EXPERIMENTS
In article consideration about deformations and failure of coating-substrate system by plastic deformation of substrate and coatings fracture were presented. Analysis were based on FEM modelling and spherical microindent...
Wear and friction behaviour of alumina thin coatings prepared by sol-gel methods
In this study, alumina coatings were prepared by the sol-gel method using the dip-coating technique. All samples were prepared on silicon wafers Si (100) with the use of aluminium sec-butoxide as a precursor. The surface...
TRIBOLOGICAL TESTS AND IMPACT TESTS OF ACRYLIC POLYMERS FOR DENTAL PROSTHETICS
The clinical functionality of the prosthesis structure consists of creating the most convenient conditions without any traumatic effects of chewing forces on the substrate and adapting it to the individual biomechanical...
PROBLEM LEPKOSPRĘŻYSTEGO SMAROWANIA MIKROŁOŻYSK
Ze względu na bardzo małą wysokość szczeliny mikrołożyska, jak również bardzo małą grubość warstwy smarującej w mikrołożyskach ślizgowych mamy do czynienia z wpływem parametrów mechanicznych warstwy wierzchniej na wartoś...
EVALUATION OF THE LUBRICATION EFFICIENCY OF GREASES ACCORDING TO CRITERION OF WEAR EXPERIMENTALLY DETERMINED AT VARIABLE VALUES OF MOTION PARAMETERS
The results of tribological investigations into the lubrication efficiency of greases in steel sliding pairs working in mixed friction conditions are presented. The lubrication efficiency was evaluated according to the c...