Analysis of the thermal state of various modifications of the mining traction motor DC type ДТН-45/27
Journal Title: Вісник Національного технічного університету "ХПІ". Серія: Проблеми удосконалювання електричних машин і апаратів. Теорія і практика - Year 2017, Vol 34, Issue 1256
Abstract
Purpose. Studies were made of the possibilities of increasing the hourly power of traction motors of direct current type ДТН-45/27. Methodology. Physical simulation of the DC motor was made to determine the influence of the geometry of the collector on the motor thermal state. Excess temperature of windings of the motor was measured by the method of resistance, collector and bearings – by the method of the thermometer Results. The results of the tests of the thermal state of the traction motor of the main modification, with the improved fan, with the shortened collector, have been obtained. The influence of modifications on the temperature of windings, collector and bearings of the motor has been analyzed. Originality. For the first time results of tests of the thermal state of traction motors of DC type ДТН 45/27 of different modifications were obtained. The greatest excess temperature in certain parts of the engine was determined. Practical value. It is proposed to consider variants of cooling (motor ventilation system) of the engine. For example, apply a two-circuit cooling system or install a motor-fan instead of an ordinary fan. It is proposed to apply axial ventilation ducts in the anchor, which will allow the flow of cold air through the core, under the front parts of the winding of the anchor and under the collector. This should solve the problem of temperature drop across the length of the anchor core and more effectively cool the collector.
Authors and Affiliations
V. P. Shaida, O. Yu. Yurieva, S. E. Dzenis
Keywords
Related Articles
- EP ID EP408069
- DOI -
- Views 126
- Downloads 0
Bot protection surge in power in the presence of higher harmonics
Overvoltage suppressors are protection devices used at high-voltage substations. These apparatus are main substation equipment protection against overvoltage. Overvoltage suppressor breakdown results in heavy accidents w...
About the operation efficiency increase of high-power shunt reactors
Ways to increase the voltage quality in energy-intensive customers’ networks are investigated. Presence of the reactive power in transmission networks decreases essentially quality of electric energy input that results i...
The control algorithm DC-DC converter for the field weakening tools
In order to improve the energy efficiency of rolling stock and its characteristics are taken Various regulatory tools. In particular, improving circuit design, the transition to pulse traction motor control system, the u...
Development latch short-circuit for overhead power line voltage of 110 - 150 kV
Proposed a simple design of electromechanical latch short-circuit for overhead power line voltage of 110-150 kV. For the selected constructions shows a method of calculating its technical characteristics. Experimentally...
Field-circuit mathematical model of permanent magnet generator for autonomous electric power system
The analysis of existing mathematical models of synchronous generators to simulate their operating conditions and loads are performed. Developed two-dimensional field mathematical model of the synchronous generator with...