Analytical determination of the frequency of short circuits of the arc at surfacing in gas dioxide with welding pool mechanical oscillations
Journal Title: Журнал інженерних наук - Year 2017, Vol 4, Issue 1
Abstract
A hypothesis has been put forward that it is possible to reduce the degree of splashing when sur-facing into carbon dioxide due to the setting of the frequency characteristics of the oscillation of the weld pool. Equations are presented that are the result of theoretical research, on the basis of which an expression for the short-circuits frequency of the inter-arc gap in the process of surfacing by on a direct current is determined. On the basis of brief literature analysis of the works past years old its is showed that the fre-quency imposed on the welding pool has to detected by crystallization frequency near the crystalliza-tion front melt which is detected by a surfacing velocity and crystallization characteristics of weld pool metal. Due to the fact that for present day the strict theory of crystallization in the conditions outer oscillations haven't created, the dependencies for an amplitude-frequency characteristic’s de-termining which were got by different researchers have been presented. The example of calculation of an arc burning time and time of short circuit in period of surfacing process have been presented. On the basis of that, frequency of short circuits has been determined.
Authors and Affiliations
V. Lebedev, S. Novikov
Keywords
Related Articles
- EP ID EP240068
- DOI -
- Views 74
- Downloads 0
Optimization of joint recycling process of drilling sludge and phosphogypsum
Joint recycling of drilling sludge and phosphogypsum with obtaining a building material is environmentally appropriate and cost-effective, as it helps not only to prevent environmental pollution, but also to solve the pr...
Analysis of the Theories for Assessment of the Quality Management Product Efficiency
In the article the advantages of introduction and reasons of low efficiency of the quality management system at the machine-building enterprises are determined. The methods and tools of the quality management system are...
Modern materials for automotive industry
The car industry uses a tremendous number of materials to build cars, including iron, aluminum, steel, glass, rubber, petroleum products, copper, steel and others. These materials have evolved greatly over the decades, b...
Adjusting the size of the rope thread in the machining of dimensional tool
The article considers the possibility of adjustment the geometrical deviations profile rope thread with a large pitch, which appear as a consequence of wear of the cutting tool during machining. Due to the fact that the...
Experimental simulation of diamond grinding of internal sphere in sapphire
Insufficient crack growth resistance and durability of sapphire or ceramic materials are essential short coming which complicates their application in total human arthroplasty. One possible approach of elimination of thi...