Analytical solutions for the temperature field in a 2D incompressible inviscid flow through a channel with walls of solid fuel
Journal Title: INCAS BULLETIN - Year 2011, Vol 3, Issue 4
Abstract
A gas (oxidizer) flows between two parallel walls of solid fuel. A combustion is initiated: the solid fuel is vaporized and a diffusive flame occurs. The hot combustion products are submitted both to thermal diffusion and convection. Analytical solutions can be obtained both for the velocity and temperature distributions by considering an equivalent mean temperature where the density and the thermal conductivity are evaluated. The main effects of heat transfer are due to heat convection at the flame. Because the detailed mechanism of the diffusion flame is not introduced the reference chemical reaction is the combustion of premixed fuel with oxidizer in excess. In exchange the analytical solution is used to define an ideal quasi-uniform combustion that could be realized by an n adequate control. The given analytical closed solutions prove themselves flexible enough to adjust the main data of some existing experiments and to suggest new approaches to the problem.
Authors and Affiliations
Corneliu BERBENTE, Sterian DANAILA, Sorin BERBENTE
Electromagnetic, flow and thermal study of a miniature planar spiral transformer with planar, spiral windings
This paper presents mathematical modeling and numerical simulation results for a miniature, planar, spiral transformer (MPST) fabricated in micro-electromechanical MEMS technology. When the MPST is magnetic nanofluid cor...
Achieving a More Electric Aircraft: a comparative study between the concurrent and traditional engineering models
The paper presents a model of concurrent engineering implemented in the life cycle of an electric motor as part of an electric aircraft with major advantages over traditional engineering. The paper also shows the 2D mode...
Implementation of a correction factor for the Pohlhausen laminar boundary layer applied on the CEVA curved wall jet model
Curved wall jets have many technical applications, ranging from aeronautical circulation controlled wings to micro-fluidics and cryogenics. This paper addresses the issue of correctly estimating the boundary layer separa...
Sensors of a Beechcraft C90 Aircraft for Extension of Data Acquisition System
In-flight data acquisition is a key point in the aircraft design process. For the control of a simulated prototype using the control surfaces, state variables such as acceleration, pitch rate for longitudinal motion, and...
Influence of cell wall curvature radius and adhesive layer on the effective elastic out-of-plane properties of hexagonal honeycombs
Numerical modeling of honeycomb structures in aerospace engineering is too tedious and time consuming. The homogenization of these structures permits to obtain an equivalent orthotropic homogeneous solid and its elastic...