Analyzing of Formation Evaluation of the Unconventional Upper-Safa Formation, Western Desert, Egypt
Journal Title: Petroleum & Petrochemical Engineering Journal - Year 2018, Vol 2, Issue 7
Abstract
Unconventional reservoirs can add huge amounts of additional energy to our world resources bases like organic shale in terms of Shale gas, shale oil, tight gas and coal-bed methane. These reservoirs can transform the world global energy market through advances in reservoir characterization, drilling, and completion technologies. Reservoir characterization and properties have great influences on the exploration and development processes, it is not through a single discipline that can provide a fulfill description of the reservoir characteristics especially for unconventional reservoirs. Moreover, unconventional sources can be defined by their difference of intrinsic of their geological sittings, origins, and tapping mechanisms, thus having different methodologies for exploration, production, and development methods. Therefore, it is very important to well express and identify the necessary parameters for unconventional characterization of these reservoirs for defining reservoir rock and fluid properties in terms of total organic carbon content, gas adsorption, level of maturity, grains surface roughness, original fluids in place, and etc. Hence there are many developed correlations and methods to get these parameters that can define each one of them, but most of them are not correlated with each other. According to the analysis of the case study, Upper-Safa formation which is considered as a shale source rock of hydrocarbon gases can be considered as a shale gas unconventional resource play through the analysis of its total organic carbon content values range between 2% to 3% by using different methods and the determination of the total gas in place, after considering both of free gas and adsorbed gas in place.
Authors and Affiliations
Mohamed Ahmed Fathy Omran
Keywords
Related Articles
- EP ID EP597314
- DOI -
- Views 51
- Downloads 0
Modelling and Simulation of Riser Reactor of a Commercial Fluid Catalytic Cracking Unit Using 6-Lump Kinetics of Vacuum Gas Oil
Both primary and conventional secondary recovery methods can approximately produce 35% of the original oil in place (OOIP). Application of nanotechnology in the petroleum industry as part of nanotechnology has already dr...
Prediction of the Behavior for Polymer Blends Using Thermodynamic Model
Two polymer blends were prepared. The first one was Poly methyl methacrylate (PMMA) and Poly vinyl acetate (PVAc), and the second was Poly vinyl chloride (PVC) and Polystyrene (PS). The first blend prepared by mixing two...
Sensitivity Tests of Parameters in Laboratory Polymer Flood Analysis
The results of preliminary polymer flood laboratory study, including the matched coreflood simulation model results were shown to decide about analytical procedure for more detailed polymer flood study. The coreflood mod...
Estimation of Flow Capacity in Pipelines Based on the Intrinsic Variation of the Volumetric Properties of the Natural Gas Mixture
In this paper, the Weymouth equation was applied so as to consider the pipeline characteristics, thermodynamic and physical gas properties. From literature, volumetric parameters like the specific gravity and compressibi...
Selection of Amine in Natural Gas Sweetening Process for Acid Gases Removal: A Review of Recent Studies
Natural gas (NG) plays an important role in different industrial and commercial sectors in India; especially in power generation and fertilizers industries. Raw natural gas coming from reservoirs to a process plant is ri...