APPLICATION OF DIGITAL DITHER TO REDUCTION OF FEEDBACK D/A CONVERTERS INFLUENCE ON INTELLIGENT CYCLIC A/D CONVERTERS PERFORMANCE
Journal Title: Metrology and Measurement Systems - Year 2006, Vol 13, Issue 4
Abstract
The effect of termination of resolution growth, common for cyclic analogue-to-digital converters (CADCs) the, which appears after a definite (threshold) number of the conversion cycles, is investigated in the paper. The effect is caused by the finite resolution of the D/A converter (DAC) in the feedback chain. In an "intelligent" CADC (IC ADC, [1-6]), the growth of resolution can be restored by adding the digital dithering signal to the signal at the input of the feedback DAC. The dependence of the rate of restored growth of resolution on the distribution and amplitude of the dithering signal is investigated. The results of analysis are verified in advanced simulation experiments.
Authors and Affiliations
KONRAD JĘDRZEJEWSKI, ANATOLIY PLATONOV
Keywords
Related Articles
- EP ID EP118660
- DOI -
- Views 45
- Downloads 0
INFLUENCE OF THE STRUCTURE OF SIGNAL CONDITIONING CIRCUITS ON THE UNCERTAINTY OF IMPEDANCE MEASUREMENT WITH ALGORITHMIC METHODS
The article presents an estimation of the impedance measurement uncertainty determined in the measurement circuit with a two-channel sampling transducer. Using the Monte Carlo method, the influence of dynamic error and q...
OPTIMAL MEASUREMENT POLICY FOR DECISION MAKING: A CASE STUDY OF QUALITY MANAGEMENT BASED ON LABORATORY MEASUREMENTS
Measurement information generates value, when it is applied in the decision making. An investment cost and maintenance costs are associated with each component of the measurement system. Clearly, there is - under a given...
DIGITAL-TO-ANALOG CONVERSION USING DELTA-SIGMA MODULATORS IMPLEMENTED IN VIRTEX-4 FPGA DEVICES
This paper presents some selected architectures of delta-sigma modulators which are suitable for implementation of digital-to-analog converters (DACs) in modern FPGA devices. Simulation and implementation of simple archi...
INTELLIGENT CYCLIC ADC. PRINCIPLES OF FUNCTIONING, OPTIMISATION AND ANALYSIS
The aim of the paper is a presentation of conceptual backgrounds of a new approach to design and analysis of high-efficient intelligent analog-to-digital converters (ADC). Particularities of intelligent conversion, metho...
TWO-PARAMETER MEASUREMENTS AND SIGNAL CONDITIONING IN DOUBLE-CURRENT SUPPLY FOUR-TERMINAL RESISTANCE CIRCUITS
A new type of the four-terminal (4T) bridge circuit unconventionally supplied by current sources connected in parallel to opposite arms, named double current bridge (2J) is presented. It has two different outputs from bo...