Application of finite element method for the analysis of a prefabricated post-and-core – tooth system
Journal Title: Challenges of Modern Technology - Year 2015, Vol 6, Issue 1
Abstract
In recent years in the area of prosthetic treatment, great emphasise was put on leaving a residual dentition inside mouth. In a teeth after endodontic treatment or with broken crown a healthy root is a natural implant that can be used for further reconstruction. Use of posts-and-cores is one of possible methods of widely damaged tooth crowns treatment. There is a lot of different types of prefabricated posts-and-cores. Numerical analysis of the prefabricated post-and-core – tooth system was conducted by the authors. The prefabricated Flexi-Flange post-and-core from the Essential Dental System was selected for the analysis. The scope of the analysis has covered calculation of displacements, strains and stresses in each elements of the analysed system – depending on the applied post material and load applied on the prosthetic crown. The analysis reviled that there is a significant influence of the type of the post material and load on results. It was found that the most unfavourable variant of load is the one with force applied on the labial surface at the angle of 45° to the axis of the tooth. The results of the analysed system provided a valuable guidelines for proper design of its form, geometrical properties, selection of the mechanical properties and the optimal strengthening degree of metallic biomaterial.
Authors and Affiliations
Sonia Loska, Zbigniew Paszenda, Marcin Basiaga, Marta Kiel-Jamrozik
Keywords
Related Articles
- EP ID EP205873
- DOI -
- Views 86
- Downloads 0
Effect of Flow Pulsations on the Accuracy of Differential Pressure Flowmeters
This work deals with investigation of influence of flow pulsation on the accuracy of gas flow rate and volume measurement by means of the differential pressure flow meters. Experimental studies of the step response curve...
Architecture of higher education in Poland in the context of sustainable development
The beginning of the 21st century was in Poland a period of intense investment activity in the development of infrastructure for higher education. University campuses have the potential to become an excellent model of ar...
Nickel-cobalt separation by solvent extraction method
Separation of cobalt(II), and nickel(II) ions from nitrate solutions using liquid-liqiud extraction process was reported. The measurements were run at 25oC and at fixed ionic strength equal to 0.5 (KNO3,HNO3). Initial co...
Experimental and modelling analysis of the separation of ionic salts solution in nanofiltration process
This paper presents the possibility of the use of Donnan and Steric Partitioning Pore Model (DSPM) based on the extended Nernst-Planck equation for interpretation of the separation of chromium(III) and chloride ions from...
Enzymatic oxidation of neobetanin monitored by liquid chromatography with mass spectrometric detection
The aim of this study was monitoring of enzymatic oxidation of neobetanin, an interesting type of betalains which is a partially oxidized betacyanin. As it belongs to betalains, it is water soluble and non-toxic, but a p...