Application of Large-Scale 3D Non-Orthogonal Boundary Fitted Sediment Transport Model and Small-Scale Approach for Offshore Structure in Cimanuk Delta North Java Sea
Journal Title: Journal of Engineering and Technological Sciences - Year 2016, Vol 48, Issue 3
Abstract
The morphology of the Cimanuk Delta at the North Java Sea has changed rapidly over the last two decades. The annual sediment deposition is about two million cubic meters (Yuanita and Tingsanchali, [1]). The large-scale ocean hydrodynamics and sediment transport model MuSed3D (Muin, [2]) was applied to the North Java Sea to simulate suspended sediment transport at the study site. A potential offshore structure was positioned at approximately 30 km from the Cimanuk Delta. The result of the large-scale model was calibrated using observation data and Landsat satellite image interpretation. The agreement between the modeling results and the observations was excellent. It was found that the critical shear stresses for erosion and deposition were 0.1 Pa and 0.05 Pa respectively. An empirical formula was further utilized to assess the local scouring at the potential offshore structure site in a small-scale domain and under extreme conditions.
Authors and Affiliations
Muslim Muin
Synthesis of TiO2 Nanofiber-Nanoparticle Composite Catalyst and Its Photocatalytic Decolorization Performance of Reactive Black 5 Dye from Aqueous Solution
In this study, synthesis of TiO2 nanofiber-nanoparticle composite photocatalyst was carried out and its photocatalytic decolorization performance was investigated. TiO2 nanofibers were developed by electrospinning. The T...
Characteristics of Rainfall-Discharge and Water Quality at Limboto Lake, Gorontalo, Indonesia
Problems of high turbidity, sedimentation, water pollution and siltation occur at Limboto Lake, Gorontalo, Indonesia. The objective of this study was to analyze the rainfall-discharge relationship and its implications fo...
An Analysis of the Effect of the Implementation of an Integrated Management System (IMS) on Work Ergonomics in an O&M Power Plant Company
Ergonomics has developed significantly for the prevention of related accidents. Its implementation, however, depends on the existing management system within a company. The integrated management system (IMS) is frequentl...
Preliminary Study on Treatment of Palm Oil Mill Effluent by Sand Filtration-Dielectric Barrier Discharge System
In the palm oil industry, open ponding, aerobic and anaerobic digestion, physicochemical treatment and membrane filtration are generally applied as conventional treatments of palm oil mill effluent (POME). In this study,...
Recent Development of the Empirical Basis for Prediction of Vortex Induced Vibrations
This paper describes the research activity related to VIV that has taken place at NTNU and MARINTEK in Trondheim during the last years. The overall aim of the work has been increased understanding of the VIV phenomenon a...