APPLICATION OFVISUALTEST METHODS LOADED ELEMENTS OF ROTATING MACHINERY FLOWTOASSESS THEIR CONDITION

Abstract

The article presents the aims and objectives of the process of non-destructive testing of turbine aircraft engines using visual methods indirect use of endoscopy. Presents brief characteristics of the construction of engines tested, analyzed the diagnostic procedures used in non-destructive testing methods are shown diagnostic equipment used in research. The paper presents examples of the results of diagnostic checks obtained for the test aircraft engine.

Authors and Affiliations

Jan WARCZEK, Mateusz JUZUŃ

Keywords

Related Articles

OPTIMAL TUNING OF MECHANICAL SYSTEMS BY APPLICATION OF A PNEUMATIC TUNER OF TORSIONAL OSCILLATION

Reducing the dynamic load of any mechanical system can be achieved when the torsional vibration magnitude is optimized by applying a pneumatic tuner of torsional oscillation. Changing the torsional stiffness of a pneumat...

INSTRUMENT LANDING SYSTEM AS AN EXAMPLE OF A PRECISION APPROACH SYSTEM

This paper presents basic information about an instrument landing system (ILS). An ILS operates as a ground-based instrument approach system, which provides precision lateral and vertical guidance to an aircraft approach...

OPTYMALIZACJA ZĄ POMOCĄ MES PRZYPORU ZAZĘBIENIA PRZEKŁADNI JEDNOSTOPNIOWEJ STOSOWANEJ W POCIĄGACH PODMIEJSCKICH

Artykuł opisuje metodykę, obliczenia oraz rezultaty optymalizacji przyporu zazębienia za pomocą metody elementów skończonych dla przekładni jednostopniowej  typ AGV-250. Przekładnia ta jest przeznaczona dla pociągów p...

THE ANALYSIS OF CAUSES OF ROAD ACCIDENTS IN LIMANOWA POVIAT

The article is an analysis of road incidents in Limanowa Poviat in the years 2010-2012 and includes their list broken down into accidents, collisions, and the number of deaths and injuries caused by such accidents. A num...

ANALYSIS METHOD OF AUTOMATIC PLANETARY TRANSMISSION KINEMATICS

In the present paper, planetary automatic transmission is modeled by means of contour graphs. The goals of modeling could be versatile: ratio calculating via algorithmic equation generation, analysis of velocity and acce...

Download PDF file
  • EP ID EP117754
  • DOI 10.20858/sjsutst.2016.90.17
  • Views 46
  • Downloads 0

How To Cite

Jan WARCZEK, Mateusz JUZUŃ (2016). APPLICATION OFVISUALTEST METHODS LOADED ELEMENTS OF ROTATING MACHINERY FLOWTOASSESS THEIR CONDITION. Scientific Journals of Silesian University of Technology. Series Transport, 2016(90), 195-204. https://europub.co.uk./articles/-A-117754