Applying Simulation to Optimize Production Flows
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2016, Vol 23, Issue 1
Abstract
In this paper an optimization is carried out through simulation of the production flows of two production systems of lower rank. A methodology of simulation-optimization is developed, starting from the general methodology for achieving a simulation process. The system to be simulated is a new system, not an existing one that has to be improved.
Authors and Affiliations
Olga-Ioana Amariei, Codruta-Oana Hamat
Keywords
Related Articles
- EP ID EP446813
- DOI -
- Views 80
- Downloads 0
Improving Filter Performances for Conducted Electromagnetic Interferences Suppression
Improving the performances of a filter for conductive electromagnetic interferences suppression involves two major directions of action: the first direction refers to the increase of attenuation at high frequency, while...
Regarding the NVH Behaviour of the more Electric Vehicles. Study Case of a Small PM Motor
The noise and vibration behaviour of electric and hybrid vehicles is dramatically different from conventional vehicles. The noise and vibration mechanisms of the individual components (combustion engine, electric motor,...
The Use of Current Generators in Electrical Converter Drives for Stepper Motors
This paper presents some ways to realize electrical converters for step-per motor drives. The first part analyzes aspects for unipolar stepper motor and use of constant current generators. The second part present current...
Mechanical Tests of the Dissimilar Welded Samples by Friction
The paper presents the experimental achievement of heterogeneous joints, with dissimilar materials, as well as the analysis of these joints by mechanical and metallographic tests. After traction testing of the specimens,...
Contributions to Design of Actuators functioning with Nitinol Active Springs
The paper presents the research results achieved in order to perform a comparison regarding the influence of natural and forced cooling proc-ess applied to the Nitinol active springs inside a linear motion actuator. SMAs...