ASSESSMENT OF SURFACE ROUGHNESS IN MQL ASSISTED TURNING PROCESS OF TITANIUM ALLOY WITH APPLICATION OF TOPSIS-AHP METHOD
Journal Title: Journal of Machine Engineering - Year 2018, Vol 18, Issue 2
Abstract
The optimization of surface roughness values considered as one of the most significant issues regarding turning process of titanium alloys with the use of minimum quantity lubrication (MQL) method. With such an aim in mind, the application of TOPSIS-AHP method is implemented in order to establish the most favourable cutting parameters for the following values of surface roughness: Ra, Rq and Rz in machining of titanium alloys regarding MQL conditions. The proposed methodology consists of the two stages. At the beginning, tests on turning process were performed on CNC lathe, taking feed rate, approach angle, and cutting speed as input parameters. Then, the TOPSIS-AHP method was applied on the given experimental data and the optimum machining parameters were determined. The findings from current investigations showed that, lower values of cutting speed, feed rate and middle value of approach angle shows the optimal results.<br/><br/>
Authors and Affiliations
Marian BARTOSZUK, Munish Kumar GUPTA
Keywords
Related Articles
- EP ID EP346534
- DOI 10.5604/01.3001.0012.0936
- Views 55
- Downloads 0
Application of bat-cell bio-ambient tests in exhaust gas emissions examinations for Euro 4 and Euro 6 combustion engines
The introduction of the subsequent European emission standards raises controversy among vehicle manufacturers and researchers. In order to meet the legal requirements, it is necessary to continually improve not only the...
METHOD FOR PREDICTING THE ACCURACY OF ROTATIONAL ELEMENTS MEASUREMENTS USING THE FIVE-AXIS COORDINATE MEASURING SYSTEM
The measurements of solids of revolution are one of the most common task in industrial practice. Therefore it is not surprising, that new solutions dedicated to improve accuracy and acceleration of measurements of rotati...
MANUFACTURING AND QUALITY ASSURANCE OF LIGHTWEIGHT PARTS IN MASS PRODUCTION
Production-related preliminary damage and residual stresses have significant effects on the functions and the damage development in fiber composite components. For this reason, it is important, especially for the safety-...
APPLICATION OF COMPLEX GAME-TREE STRUCTURES FOR THE HSU GRAPH IN THE ANALYSIS OF AUTOMATIC TRANSMISSION GEARBOXES
In the article was discussed the possibility of structures and information systems complex game trees for the analysis of automatic gearboxes. The purpose of modelling an automatic gearbox with graphs can be versatile,...
DIGITAL TWIN BASED SYNCHRONISED CONTROL AND SIMULATION OF THE INDUSTRIAL ROBOTIC CELL USING VIRTUAL REALITY
During the years common understanding of the possibilities and perspectives of Virtual Reality (VR) usage has been changed. It is thought that VR is mainly used in entertainment purposes, but it is being used already for...