Automated Apparatus-Program System for Evaluating the Strength of a Reducer Shaft
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2010, Vol 33, Issue 3
Abstract
The paper deals with a design of automated system for studying the strength of a reducer shaft according to the probabilistic evaluation method concerning the examination of machine elements. The apparatus-program system is Windows-based with an opportunity for connection with program packages about a numerical study of objects and details according to the finite element method. The data about the studied objects are obtained by means of two ways, namely: directly from an integrated system for measuring parameters of details, which is worked in the mode of real time, or from files containing data about studied objects, that are received as a result of other examinations. The automated apparatus-program system is open for development in the following directions: addition of methods for evaluating various machine elements; expansion of control-measurable system with regard to different methods and systems for measuring the studied quantities.
Authors and Affiliations
Daniela ZHELEZAROVA, Silviu MACUTA, Ivan BALASHEV
Keywords
Related Articles
- EP ID EP632243
- DOI -
- Views 82
- Downloads 0
Selective Recovery by Solubilization of Metals Ions of Chromium, Iron and Zinc from Electroplating Sludge to Develop Pigments for Ceramics Industry
Electroplating industries discharge large amounts of heavy metals, including chromium (Cr), iron (Fe) and zinc (Zn) ions, in the wastewater resulted from technological processes, as well as in the sludge from wastewater...
ZnO Nanoparticles: Green Synthesis, Properties and Applications
In this paper, a review, there are presented “Green” routes used in the synthesis of ZnO nanoparticles because they are more eco-friendly alternatives in comparison with chemical and/or physical techniques. Microorganism...
Study of Heat Treatment Influence on Aluminum - Based Alloy ATN-Si10Cu4
This work presents the experimental results concerning the behavior on heat treatment of on aluminum based alloy. The laboratory level experiments achieved on samples of ATN-Si10Cu4 (4145 series) alloy illustrate the va...
Influence of the Anodic Oxidation Treatment on the Corrosion Behaviour of Aluminium and Aluminium Alloys
This paper deals with the effect of anodic oxidation treatment on the corrosion behaviour of 6061 aluminium alloy in natural sea water. Anodic oxidation treatment leads to the formation of an amorphous oxide layer on the...
Grain Refinement in Aluminum Alloys by Acoustic Cavitation Phenomena
In this article, ultrasonic method of transmitting forced vibrations to solidifying aluminum-alloy melts is presented. In the presence of well developed cavitation situations, a fine and homogeneous microstructure has b...