AUTOMATED MEASURING COMPLEX FOR ACCEPTANCE TESTING OF DC AND UNDULATED-CURRENT TRACTION MOTORS
Journal Title: Наука та прогрес транспорту - Year 2016, Vol 0, Issue 6
Abstract
Purpose. In the paper it is necessary: 1) to familiarize the reader with the modern classification of measurement and diagnostics, familiarize with problems of automating the measurement of basic parameters during program execution of qualification tests of traction motors; 2) to make recommendations to improve the measurement ac-curacy, reduce labor intensity of work for carrying out measurements, and reduce the requirements for the qualification of the staff; 3) to provide practical implementation of measurement system, built on the basis of the practical recommendations contained in the article. Methodology. The work presents the classification of measurement and diagnostic tools. The author considered a list of equipment that can be used in measurement systems, as well as third-party options for measuring complex and measuring complex using stand management system. Their functional schemes were proposed. The author compared the advantages and disadvantages of these schemes to make recommendations on areas of their optimal use. Findings. Having analyzed the functional scheme of measuring systems, it was found that the use of the control system microcontroller as a measuring complex is expedient if the measurements have largely a test process control function. The use of a third-party measuring complex is more appropriate in cases when it is required: to eliminate dependence on the stand management system, to provide high mobility and reduce the requirements for the qualification of the staff. Originality. The work presents a brief over-view of the measurement means. The author developed the functional schemes of measuring systems using stand management system and third-party measuring complex, proposed the criteria for evaluating their optimal use. Practical value. Based on the proposed functional diagram, the measuring system on National Instruments hard-ware and software basis was set up. The sensors by LEM Company were used as primary transducers for the measurement of currents and voltages. Thanks to chassis compact size, it was united in one body with the power supply for sensors. Thus, it was possible to reduce the size of the entire complex, simplify and speed up its preparations for the measurements.
Authors and Affiliations
A. Yu. Drubetskyi
Keywords
Related Articles
- EP ID EP226687
- DOI 10.15802/stp2016/90482
- Views 94
- Downloads 0
FEATURES OF ASH OF THERMAL POWER PLANTS AS AGGREGATE FOR CONCRETES
Purpose. The scientific work is dedicated to development of scientific-technical bases of production and application of concrete on the basis of ashes of thermal power plants (TPP). Methodology. The properties of TPP ash...
СПОСОБИ УПРАВЛІННЯ ІНЕРТНІСТЮ ОПАЛЕННЯ
Мета. У науковій роботі передбачається оцінити вплив теплової інертності водяної системи опалення (при перехідних режимах роботи) на температурний режим у пасажирському вагоні. А також запропонувати технічні рішення, спр...
ПРОГНОЗУВАННЯ ОЦІНКИ ХАРАКТЕРИСТИК НОВИХ ТРАНСПОРТНИХ ЗАСОБІВ
Мета. Наукова робота має за мету прогнозування оцінки характеристик тягових і нетягових транспортних засобів, які будуть задовольняти й відповідати потребам та вимогам залізничної галузі, що постійно розвивається. Методи...
MECHANICAL PARAMETERS CONTROL OF THE NEUTRAL RELAY OF RAIL AUTOMATICS BASED ON WAVELET ANALYSIS
Purpose. The scientific paper focuses on development of a method for mechanical parameters control of the neutral relay of rail automatics by current analyzing in the coil and the relay contacts at switching based on wav...
COMPLEX CALCULATION OF HATCH COVER OF GONDOLA CAR FROM POLYTYPIC MATERIALS WITH INTERMEDIATE S-SHAPE STRAPPING
Purpose. The proposed study is aimed at determining the strength indicators of the hatch cover of universal gondola car with intermediate S-shaped strapping made of polytypic materials under operational loading schemes....