AUTOMATION OF CALCULATIONS OF TECHNICAL CHARACTERISTICS OF MANOMETRIC TUBULAR SPRINGS
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2019, Vol 42, Issue 2
Abstract
Tubular springs have received the name “Manometric” thanks to their initial use in manometric devices. For the wide use of tubular springs in various spheres of human activity, relevant methods of calculating their static and dynamic characteristics are needed. Many works have discussed the study of manometric tubular springs. The main method for calculating static characteristics of springs is the semi-membrane theory of shells, and to calculate the frequencies of natural oscillations, the spring was considered as a rod with a deformable cross-section. The article considers algorithms for calculation of static characteristics and frequencies of natural oscillations of manometric tubular springs with known geometric parameters of a spring and physical properties of a material. For calculations, in general, numerical methods were used, so for their implementation, it was required to develop programs for automatic design, in which the algorithms are implemented. The article describes the software systems for calculating the characteristics of springs: “Module” and “PCRMTP”, which allow investigating the stress-strain state of the cross-section of tubular springs, determine their static characteristics with known geometric parameters, spring material, internal pressure and operating conditions. In addition, in the complex “PCRMTP” the possibility of calculating the frequencies of natural oscillations of tubular springs is realized. The automation of the design of tubular springs significantly reduces the labour input of selecting springs with the necessary characteristics and thereby eliminates the deterrent factor of introducing new designs.
Authors and Affiliations
Sergey P. Pirogov, Aleksandr Yu. Chuba
Keywords
Related Articles
- EP ID EP502220
- DOI 10.26480/jmerd.02.2019.27.29
- Views 73
- Downloads 0
LOW SPEED ROLLING BEARING DIAGNOSTICS USING ACOUSTIC EMISSION AND HIGHER ORDER STATISTICS TECHNIQUES
Diagnostics in low speed rolling element bearings is difficult. Not only are normal frequency domain diagnostics methods not appropriate for this application, but the bearing response signals are usually immersed in back...
THEORETICAL JUSTIFICATION OF CONDITIONS OF CUTTING TEMPERATURE REDUCTION AT GRINDING OF MATERIALS
This research used an adiabatic rods model to conditionally represent the removable allowance and which are cut by a wheel during the grinding process. Numerical calculations were used to establish that the heating time...
ENERGY, ECONOMIC AND ENVIRONMENTAL IMPACT OF PALM OIL BIODIESEL IN MALAYSIA
Malaysia is among the lushest places on Earth with nearly countless varieties of flora and fauna residing within it. An interesting one being the palm oil tree, a stereotypically tropical sight. A specific variety of it...
A RESEARCH ON MARINE DIESEL ENGINE SPEED CONTROLLER BY FUZZY LOGIC CONTROL THEORY BASED ON EXPERIMENTAL INVESTIGATION
The marine diesel engine speed automatic controller has an important mission in the field of keeping the setting speed constantly in the variable sea environment. Before, the conventional PID (Proportional – Integral – D...
EXPERIMENTAL INVESTİGATIONS ON PERFORMANCE CHARACTERISTICS OF A VARIABLE COMPRESSİON RATIO ENGINE OPERATED ON DUAL FUEL MODE USING DIESEL AND BIODIESEL (OBTAINED FROM COTTON SEED OIL AND RICE BRAN OIL)
Biodiesel is recognized replacement for fossil fuel in compressed ignition engines due to its significant environmental benefits. In this study, an experimental study has been evaluated on a variable compression ratio di...