AUTOMATION OF THE TECHNOLOGICAL PROCESS FOR MANUFACTURE OF CALCULATED WATER-COAL FUEL
Journal Title: Вчені записки Таврійського національного університету імені В. І. Вернадського. Серія: Технічні науки - Year 2018, Vol 29, Issue 4
Abstract
In this article a technological scheme of GDP production will be developed, a functional scheme of automation, a mathematical model for regulating the supply of coal dust. Use the SCADA Trace Mode software to create screen forms. Taking into account the fact that coal is cheaper than fuel oil and gas, it is also necessary to imagine that combustion of coal at the TPP does not simply provide us with energy and it does not turn out to be very cheap, since the use of coal at the TPP determines the overgrowth of the main technological chain of the power plant: coal combustion in the furnace of the boiler and the steam, with the help of a turbine rotating an electric generator, the energy from which is issued to the system with a whole bunch of auxiliary and additional units, including provide unloading, storage, preparation and filing and burning. This includes the railway industry, carriages, fuel supply lines with intersections, crushers, bunkers, mills and pylostems. And coal is recycled hundreds, and even thousands of tons per hour. The charcoal is scattered, self-engulfing, sawing, and dust explodes. Therefore, there are systems of dust suppression, aspiration, water drainage with treatment facilities. All these additional nodes increase the volume and cost of construction of the TPP, complicate the work of the operating personnel, without providing a one hundred per cent safety guarantee and normal sanitary and hygienic conditions of work.
Authors and Affiliations
І. В. Вовк
Keywords
Related Articles
- EP ID EP580957
- DOI -
- Views 63
- Downloads 0
THE INFLUENCE OF THE COMPOSITION OF SODUIM-CESIUM-MERCURY AMALGAM ON SPECTRAL CHARACTERICTICS OF HIGH PRESSURE SODIUM LAMPS FOR GREENHOUSES
The article deals with the results of the research of the triple system of sodium-cesium-mercury amalgam of high pressure sodium lamps. The melting temperatures of amalgams have been set. The vapour pressure of component...
INFLUENCE OF PLANT RAW МATERIAL ON MICROSTRUCTURE AND SENSOR PROPERTIES OF FISH AND PLANT SEMI-PRODUCTS
In the article the features of the influence of plant material (wheat bran) on the microstructure and sensory characteristics of fish and plant minced meat is studied. The kinetics of swelling of plant material in minced...
ENHANCEMENT OF THE FLAT PRODUCTS MIX AT THE METALLURGICAL PLANT IN ITALY
Process development for production of 4 х 3 125 х 16 000 mm dimensions plate produced of as-cast slabs of 217 х 1 355 х 780 mm dimensions instead of slabs of 150 mm thickness for rolling mill 3 200 at Metinvest Trametal...
DETERMINATION OF BARJES PARAMETERS FOR THE TRANSPORT OF LONG RAILS
It is proposed to select the parameters of the vessel from the swimming pool in order to form a fleet for technological transport. Improving transport conditions by branching out transport infrastructure. Construction of...
FUNCTIONAL CHARACTERS OF THE MOTOR VEHICLE FLOW AND WAYS OF PROVIDING ENVIRONMENTAL SAFETY OF THE TRANSITIONAL TERRITORY
On the basis of the continuity criterion for the piecewise linear function of vehicle traffic modes, the minimum values of density, intensity and speed at which the collective movement of physical units of auto transport...