BEARING CAPACITY OF STEEL-CONCRETE BENT ELEMENTS REINFORCED WITH ADDITIONAL UNSTRAINED ARMATURE AT DIFFERENT LEVELS OF STRAINED STATE

Abstract

In this article, there are given the results of studies on the strength of steel-concrete bent elements, in which additional reinforcement was introduced at various levels of initial reinforcement and loading, as well as after unloading, and the beams were brought to destruction. The need for overhead cover reinforcement during the process of its exploitation appears not only in the course of reconstruction but also due to its physical aging that is caused by various factors. Accomplished part of the research does not take into account the prehistory of the work of the bent element before reinforcement or takes it into account approximately. The objective of the study of bent elements, in which the reinforcement with additional unstrained reinforcement is performed under the current load of different levels, has practical and theoretical significance. Moreover, such study is urgent and the solution of the problem will contribute to the growth of the economic efficiency of reinforcing steel-concrete structures.

Authors and Affiliations

V Barabash, Andrii Kramarchuk, Borys Ilnytskyy

Keywords

Related Articles

НОВА КОНСТРУКТИВНА ФОРМАЖОРСТКОГО З’ЄДНАННЯ МОНОЛІТНОГО ЗАЛІЗОБЕТОННОГО ПЕРЕКРИТТЯ З ТРУБОБЕТОННОЮ КОЛОНОЮ

Basing on existent concrete filled tube to reinforced concrete ceiling joining constructive form research and investigation in reinforced concrete area analyzing, the new constructive form of rigid connection of concrete...

The air channel function in real life – insulation against rising damp in historical buildings

The purpose of the research is to find adequate solution against rising damp in historical buildings. The improvement in this case is the use of ventilated air channels. A special group of historical buildings are church...

ЕКСПЛУАТАЦІЙНИЙ СТАН, РЕКОНСТРУКЦІЯ ТА РЕЗУЛЬТАТИ ВИПРОБУВАНЬ РЕКОНСТРУЙОВАНОГО АВТОДОРОЖНЬОГО ШЛЯХОПРОВОДУ

The small and medium span bridges constructed in the 50-60s of the last century with span structures of prefabricated reinforced concrete beams according to the typical project of 1956 year currently do not meet modern e...

ЗБІРНІ КАРКАСИ БАГАТОПОВЕРХОВИХ БУДИНКІВ З НЕРЕГУЛЯРНОЮ СІТКОЮ І ЗМІННОЮ ВИСОТОЮ ПОВЕРХІВ

In the construction of multi-storey buildings for different purposes, for many previous decades mostly typical prefabricated frame with a regular grid of columns and a constant height a floors were used. Such typical pre...

ВПЛИВ ВОДЯНИХ СТРУМЕНІВ ВІЯЛОВОГО ТИПУ НА ТЕПЛОВИЙ ЗАХИСТ ПІД ЧАС ПОЖЕЖ

The article deals with the following methods of protection of personnel from thermal radiation during fire, such as the use of heat-shielding suits, heat-reflective screens and water curtains. The tactical and technical...

Download PDF file
  • EP ID EP438838
  • DOI -
  • Views 191
  • Downloads 0

How To Cite

V Barabash, Andrii Kramarchuk, Borys Ilnytskyy (2018). BEARING CAPACITY OF STEEL-CONCRETE BENT ELEMENTS REINFORCED WITH ADDITIONAL UNSTRAINED ARMATURE AT DIFFERENT LEVELS OF STRAINED STATE. Вісник Національного університету "Львівська політехніка". Серія "Теорія та практика будівництва", 0(888), 3-11. https://europub.co.uk./articles/-A-438838