Behavior of Refractories in Interaction with Metallurgical Slag
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2012, Vol 35, Issue 4
Abstract
The aim of this paper is to present the studies concerning behavior of the refractory to metallurgical slag corrosion. The corrosion resistance at high temperatures using the static method on samples containing chamotte or alumina were performed. The corrosion degree of refractory plastic mass was established by corrosion determination, and the corrosion rate and macroscopic image analysis measurements. The analysis of samples subjected to macroscopic measurements showed a better behavior in terms of corrosion resistance for alumina samples.
Authors and Affiliations
Florentina POTECAŞU, Marcela MUNTEAN, Mariana IVAN
Keywords
Related Articles
- EP ID EP607728
- DOI -
- Views 73
- Downloads 0
Superplastic Behavior of 2024 Aluminum Alloy Sheet Subjected to Thermomechanical Processing
This paper describes the superplastic behavior of the commercial 2024 aluminum alloy. The investigated alloy was processed in a 3 mm thick sheet form. The superplastic properties of the alloy were investigated using an u...
A Study of Electric Properties of Fiber Fabric Based Filled Epoxy Composites
Electric and magnetic properties of laminate carbon fiber fabric based epoxy composites are investigated through experimental techniques. Various concentrations of powder fillers were used in order to change the basic pr...
Functional Model of Savonius Type Vertical Axis Wind Turbine with Periodic Coupling of Adjacent Vertical Blades
The field of HAWT (Horizontal Axis Wind Turbines) regarding the use of wind energy (WE) as a renewable energy source (RES) is well researched and the results are covering both the power range and efficiency. Deficiencies...
Destruction of the Inside Part of a Coat of a Hard Chrome Cylinder Used for Combustion Engines
This paper had as a starting point the broken down through explosion suffered by the coat of a cylinder made of cast iron. The cylinder coat material must provide the necessary resistance to dynamic and static stresses a...
Electrical Properties of Ultra-Sonicated Epoxy Resin
As ultra-sonication is a mostly used method to disperse the particles into the polymer matrix, the aim of this study is to point out the effect of epoxy’s exposure to ultra-sounds over the electrical properties, especial...