Behavior of Self-Compacting Concrete Using Using Pozzolanic Materials
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 1
Abstract
Self-Compacting Concrete (SCC) is a type of concrete that has the capacity to consolidate under its own weight. Self compacting concrete has ability involves not only high deformability of paste or mortar, but also resistance to segregation between coarse aggregate and mortar when the concrete flows through the congested reinforcement. One of the major challenges faced by civil engineering industry is to execute projects in harmony with the nature. In the present study is focused to investigate the rheological properties and strength properties of bagasse ash and rice husk ash self compacting concrete produced with 0%, 10%, 20% and 30% of the cement (by mass) replaced by bagasse ash and rice husk ash and sand replaced by 20%, 30%, 40%, 50% and 70% by quarry dust. For Fresh property was done for all the replacement and hardened properties were done at 7, 28, 91 and 180 day for compressive strength, 7, 28 and 120 day for split tensile strength and flexural strength. Attempts have been made to study the properties of such SCC and to investigate the suitability of Quarry Dust to be used as partial replacement materials for sand in SCC.
Authors and Affiliations
Mr. H. S. Narashimhan, Dr. Karisiddappa, Dr. Ramegowda M
Keywords
Related Articles
- EP ID EP437681
- DOI 10.9790/1684-1501025764.
- Views 94
- Downloads 0
Behavior of MSE Wall with Strips and Georgics Reinforcement Subjected To Compaction Loadings
This paper focuses on the comparison of the behavior of a panel type MSE wall using the existing geosynthetic strip and steel strip reinforcement with the behavior of a suggested design of panel type MSE wall using wider...
Formulation, Manufacture And Characterisation Of The Resistivity Proprety Of Carbon Brush Using Palm Kernel Shell (Pks) As Source Carbon.
The manufacture of carbon brush (CB), a critical motor and generator component has been in existence for over a century in which various materials like: copper metal, graphite, retort coke, petroleum coke and other amorp...
Computer-Aided Manufacturing Processes: A Comparison AndDecision Model For Selecting An Analytical Or Numerical Approach To A Drawing Design
This article’s main function is to analyze the possibilities and applications of numericalcomputational analysis (in this case, the Abaqus software) to drawing considering both problem solving and project definition rela...
3D Analysis for Conical Tanks under Seismic Loads
In this study, conical ground and elevated tanks` seismic response has been investigated. This study has been motivated with the deficiency of data in design codes concerning conical tanks seismic analysis. Seismic analy...
Research on Optimization Design of Multi-motor Intelligent Dispensing System
Through the research on the intelligent dispensing system of Chinese and Western medicine at home and abroad, the advantages and disadvantages of the finished products of each intelligent dispensing system are analyzed,...