CALCULATION AND EXPERIMENTAL ESTIMATION OF RESULTS OF ELECTRO-THERMAL ACTION OF RATIONED BY THE INTERNATIONAL STANDARD IEC 62305-1-2010 IMPULSE CURRENT OF SHORT BLOW OF ARTIFICIAL LIGHTNING ON THE THIN-WALLED COVERAGE FROM STAINLESS STEEL
Journal Title: Електротехніка і Електромеханіка - Year 2017, Vol 0, Issue 1
Abstract
Purpose. Calculation and experimental researches of electro-thermal resistibility of the pre-production thin-walled sheet models of outward roof of height technical buildings from stainless steel are easily soiled 12Х18Н10Т to direct action on them rationed by the International Standard IEC 62305-1-2010 aperiodic impulse of current of short bow of artificial lightning of temporal form 10/350 μs with the proper admittances on his peak-temporal parameters (PTP). Methodology. Electrophysics bases of technique of high voltage and large impulsive currents (LIC), and also scientific and technical bases of planning of high-voltage impulsive devices and measuring methods in them LIC with followings below extreme PTP: amplitude of impulse of current of ImL=200 кА (with admittance ±10 %); integral of action of impulse of current of JL=10•106 A2•s (with admittance ±35 %); %); duration of wavefront current of T1=10 μs (with admittance ±20 %); time, proper amplitude of impulse of current of ImL, tmL≤24 μs (with admittance ±20 %); duration of flowing of impulse of current of T2=350 μs (with admittance ±10 %). Results. The results of evaluation calculation and experimental researches of electro-thermal resistibility of the indicated pre-production sheet models are resulted measuring in the plan of 0,5 x 0,5 m from stainless steel are easily soiled the 12Х18Н10Т thickness of 1 mm to action on them of aperiodic impulse of current of short blow of artificial lightning with rationed PTP on the requirements of the International Standard IEC 62305-1-2010. In high current experiments amplitude of ImL of the aperiodic rationed impulse of current of artificial lightning of temporal form of T1/T2=15 μs/315 μs changed in the range of (100-184) кА. The integral of action of JL of impulse of current for I-IV of levels of protection of lightning of technical objects (TO) numeral made from 2,32•106 А2•s to 7,88•106 А2•s, and the flowing through the probed pre-production steel models electric charge of qL numeral changed from 44,2 Kl to 81,3 Kl. It is shown that direct influence rationed by the International Standard IEC 62305-1-2010 impulse of current of short blow of artificial lightning with in-use PTP on the indicated pre-production steel models causes in them the rounded small hole of melting of surface of coverage a depth no more than 50 μm and diameter no more than 60 mm. The results of calculation and experiment coincide within the limits of 5 %. Originality. First in world practice on the unique generator of LIC of short blow of artificial lightning of type of GITM-10/350 experimental researches of electro-thermal resistibility of pre-production sheet models of outward roof are conducted TO of stainless steel 12Х18Н10Т is easily soiled to direct action on them of impulses of current of an artificial storm air spark digit with extreme parameters. Practical value. Drawing on the got results in practice of protection height TO from linear lightning will allow substantially to promote their functional and fire-prevention safety in the conditions of direct action on them of the plasma ductings of high current storm air spark discharge.
Authors and Affiliations
M. I. Baranov, V. V. Kniaziev, S. V. Rudakov
Keywords
Related Articles
- EP ID EP291694
- DOI 10.20998/2074-272X.2017.1.06
- Views 125
- Downloads 0
MODELING OF AN ADVANCED HEAT EXCHANGE UNIT WITH MICROCHANNELS FOR A COMBINED PHOTOENERGY SYSTEM
Purpose. Mathematical modeling of the heat exchange unit main parameters for photoenergy system based on general models with forced circulation of heat transfer fluid. Methodology. To determine the coefficient of heat tr...
ANALYSIS OF ELECTROPHYSICAL CHARACTERISTICS OF GROUNDS IN THE VICINITY ELECTRICAL SUBSTATION OF UKRAINE
Purpose. Definition of the direction for further research to improve accuracy of the calculation of rated parameters of ground grids based on the analysis of statistical databases of electro-physical characteristics of t...
ANALYSIS OF ELECTROMAGNETIC PROCESS IN COMBINED INDUCTOR SYSTEMS, AS TOOLS FOR STRAIGHTENING OF MODERN CAR
The field in combined inductor systems exists only over workpiece, it occurs at only a low-frequency circular magnetic field. In this paper electromagnetic processes in tools of the magnetic pulse attraction (the combine...
AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN A SCIENCE AND TECHNIQUE. PART 24: SUBJUGATION OF EARTHLY DRY LAND AND WORLD OCEAN
A short essay of world history of subjugation and study by humanity of earthly continental dry land and enormous marine spaces of Earth is presented.
NEW APPROACHES AT CONSTRUCTION OF MAGNETIC CONDUCTORS FOR MAINS TRANSFORMERS
It is carried out exploration and the assaying of new approaches at construction of stacked laminated cores of mains transformers which consists in simultaneous application in a magnetic conductor of the anisotropic and...