Calculation of non-homogeneous anisotropic rectangular shells with arbitrary fixation on the contur
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2017, Vol 1, Issue 68
Abstract
Methods of calculating the non-homogeneous anisotropic rectangular shells with arbitrary fixation on the contour is set out, which is reduced to a boundary value problem, the solution of which is associated with considerable difficulties, since it is necessary to integrate a system of three partial differential equations with variable coefficient. To solve a system of equations in terms of displacements using finite difference method (FDM) in combination with different variations of analytical solutions. It is advisable to construct a numerical solution of the problem so that in difficult cases the support fixing and uploading solution sought, not directly, but in the form of amendments to the known solution for simple cases of reference to consolidate and uploading at finding the solutions which the analytical methods or the FDM with sparse mesh may be used. As examples the results of calculation for a series of square orthotropic shells with a fixed boundary under the action of a concentrated load are given.
Authors and Affiliations
N. V. , Zavrak
Keywords
Related Articles
- EP ID EP325851
- DOI -
- Views 149
- Downloads 0
Strengthening of reinforced concrete structures by external reinforcement with composite materials
Investigations of national and foreign achievements in the rehabilitation and reinforcement of reinforced concrete using composite materials containing fibers with high mechanical strength and use of special epoxy resins...
Influence of snow loading character on optimal lattice`s geometric shape of the combined arch system
In the article, the authors investigate the question of determining of the lattice made from flexible elements geometric share in a combined arch system proceeding from the condition of its operability and the minimum of...
Vibration test of brickwork fragments with reinforced concrete core
Modern methods of diagnostics should provide the ability to quickly and fully assess the actual characteristics of buildings structures evaluation, be simple and mobile enough to be used during the design, construction,...
Methodology of numerical modeling by boundary element method (BEM) of development of soil border condition zones of the ring foundation
Since reliability of foundations depends on the ability to assess engineering and geological conditions of bases, their hydrogeological situation, change in these properties during construction and operation, there is a...
The pipeline monitoring
Experience of monitoring of high pressure gas pipeline laid on steep slope area above the underground workings is outlined. For research the geodetic reference network consisting of four points was established on the sit...