Calculation of the deformed state of the cable pipeline with circular surfaces
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 92, Issue 4
Abstract
The displacement and deflections of reinforced pipeline supports with cellular (hollow) walls are estimated. The investigated pipeline is constructed from a spiral tube. The pipe is divided into finite circular closed cylindrical shells of a certain length, at the ends of which elastic supports having the appropriate stiffness are located. The theory of anisotropic cylindrical shells is used. By the equations of the linear theory of anisotropic cylindrical shells, the averaged components of the displacement vector are determined. An appropriate system of differential equations is derived in order to establish displacements. The solution of these equations is presented in the form of double trigonometric Fourier series. In this case the normal ground resistance of the pipeline burial is taken into account. As a result, numerical calculations of displacements and deflections of the cellular pipeline are carried out.
Authors and Affiliations
Roman Hromyak, Mykola Stashchuk, Nazar Stashchuk
Keywords
Related Articles
- EP ID EP521738
- DOI 10.33108/visnyk_tntu2018.04.042
- Views 77
- Downloads 0
Robust stability and evaluation of the quality functional of linear discrete systems with matrix uncertainty
New methods for analysis of robust stability and optimization of discrete output feedback control systems are developed. Sufficient stability conditions of the zero state are formulated with the joint quadratic Lyapunov...
Perspective directions to increase heat tolerance of silicone carbid and molibdenum disilicide based materials
Perspective directions to increase heat-tolerance of silicon carbide and molybdenum disilicide ceramic electric heaters have been outlined based on literary data analysis and research results. The producers of electric h...
Development of two-dimensional theory of thick plates bending on the basis of general solution of Lamé equations
A theory of bending of the thick plate normally loaded on lateral surfaces, when its stress state is not described by the hypothesis of Kirchhoff–Love or Tymoshenko, is suggested. Its three-dimensional stress-strain stat...
The effect of initial deformations of the thick plate on its contact interaction with the ring punch
The calculation of the structural elements and mechanisms strength is one of the most important stages while their developing. Initial deformations are almost always available in the structural elements and machine parts...
The numerical anaysis of stressed state of multilayered coverings with defects on an rigid foundation
Multilayered coverings can be considered as thick plates resting on a rigid substrate. For research of stress-strain state (SSS) of multilayered plates on an rigid foundation the refined structural-continual model of mom...