Calculations of Segmented Modules Based on Bi2Te3 / PbTe Materials for Thermoelectric Generators

Journal Title: Фізика і хімія твердого тіла - Year 2014, Vol 15, Issue 2

Abstract

The results of segmented thermoelectric generator modules calculations by computer simulation methods are presented. Found that use of Bi2Te3-based materials as cold sections and PbTe-based materials as hot sections for two-section modules in the temperature range 303-773 K, allows to multiply their efficiency by 1,28 as compared to single-section ones.

Authors and Affiliations

Т. О. Manyk, V. R. Bilynskyj-Slotylo

Keywords

Related Articles

Electrochemical Investigation of Hydrogen Influence on GaSe–PbSe System

It has been investigated the electrochemical characteristics of gallium and lead selenides, depending on electrolyte type with and without the presence of solar irradiation. During the sunlight irradiation polarization t...

Thermal Conductivity Mechanisms in Compressed Thermoelectric Materials Based on A4B6 Compounds

The factors influencing the value of the thermal conductivity coefficient of thermoelectric materials based onlead telluride obtained by powder pressing method have been analyzed. The model is presented and its parameter...

Infiltration Kinetics of Cr3C2 by Manganese Cupronickel in the Process of Obtaining Cermets

A theoretical model of infiltration kinetics based on the Darcy's law which was evaluated by W − Lambert function has been established for Cu-Ni-Mn alloy (grade MNMts 60-20-20) during melt infiltration into Cr3C2 porous...

Sensory Elements and Devices Operational Diagnostic Blood Glucose

The problem of monitoring diabetes is caused as a significant prevalence of the disease, and development on this basis of complex related complications, early disability and mortality. [1] So important is operational and...

Classical Size Effects in Sb Doped SnTe Thin Films

The possibility of obtaining strongly degenerate (> 4×1020 сm-3) SnTe thin films (d = 200 - 2000 nm) with p-type conductivity by thermal evaporation in vacuum of SnTe crystals doped with Sb, with subsequent condensation...

Download PDF file
  • EP ID EP316564
  • DOI -
  • Views 52
  • Downloads 0

How To Cite

Т. О. Manyk, V. R. Bilynskyj-Slotylo (2014). Calculations of Segmented Modules Based on Bi2Te3 / PbTe Materials for Thermoelectric Generators. Фізика і хімія твердого тіла, 15(2), 413-417. https://europub.co.uk./articles/-A-316564