Carbide Type Influence on Tribological Properties of Hard Faced Steel Layer – Part I – Theoretical Considerations
Journal Title: Tribology in Industry - Year 2010, Vol 32, Issue 2
Abstract
This paper gives a theoretical review of influence of the most important alloying elements on steel, and review of the most important carbide-forming elements and states the conditions which elements should fulfill in order to be considered as carbide-forming. It primarily involves alloying elements which in the iron-carbon system can form simple, complex or special carbides, i.e. phases of interstitial and substitutive type. It also gives a review of carbide types that are formed during either production or reparatory hard facing of steel parts with different types of filler materials
Authors and Affiliations
V. LAZIĆ, D. MILOSAVLJEVIĆ, S. ALEKSANDROVIĆ, P. MARINKOVIĆ, G. BOGDANOVIĆ, B. NEDELJKOVIĆ
Keywords
Related Articles
- EP ID EP114194
- DOI -
- Views 123
- Downloads 0
Slurry Erosion Behavior of Destabilized and Deep Cryogenically Treated Cr-Mn-Cu White Cast Irons
The effects of destabilization treatment and destabilization followed by cryogenic treatment have been evaluated on the microstructural evolution and sand-water slurry erosion behavior of Cr-Mn-Cu white cast irons. The p...
Mixed Lubrication Solution of Dynamically Loaded Radial Slide Bearings
A solution of radial slide bearing dynamics and tribology incorporating the influences of real surface roughness contacts or the influence of surface roughness on bearing lubrication is presented in this paper. Finite di...
Monitoring Physical and Chemical Characteristics Oil for Lubrication
Different technical systems require for the appropriate lubricant to be used at the appropriate place, at the appropriate time and in an appropriate quantity. Determination of technical systems condition has very importa...
Wear Characteristics of Multilayer-Coated Cutting Tools in Milling Wood and Wood-Based Composites
This article presents the characteristic of wear on the clearance face of newly multilayer-coated K10 cutting tools when cutting mersawa wood, fiberboard, particleboard, and glass reinforced concrete (GRC). The K10 cutti...
Effect of Cryogenic Treatment on the Wear Behavior of Additive Manufactured 316L Stainless Steel
In this research work, an investigation is done to study the effect of cryogenic treatment on 316L SS fabricated using Direct Metal Laser Sintering process. Cryogenic treatment is done at -196°C for 24 hours in a chamber...