Characterication Of Modified Asphalt Mixtures With Asphalt Cement With Road Bond En-1
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 4
Abstract
The objective of this study is to evaluate the effect of adding Road bond EN-1 to the asphalt cement and their asphalt mixtures properties, and the long term performance. The variables considered are the effect of adding different ratios of EN-1 to suej 60/70 Asphalt cement properties . The added ratios are 0.3, 0.4 and 0.57 by weight for 60/70 A.C. For asphalt mixtures, the variables considered are the effect of the above modified asphalt cement on Marshall Properties. The results of this study indicate that the addition of EN-1 to suez A.C and its asphalt mixtures at all ratios improved all properties. The addition of EN-1 to seuz A.C improves its thermal characteristics by increasing its penetration index. Increasing the percentages of EN-1 increases stability and Marshall Stiffness and decreased the flow of Asphalt concrete mixtures.
Authors and Affiliations
Amal Al-Ayaat, A. M. Azam
Keywords
Related Articles
- EP ID EP438414
- DOI 10.9790/1684-1504023944.
- Views 47
- Downloads 0
Study of The Manufacture Ofdie-Cutting Part And The Mechanical Fractureof Die Block
The die processes, such as punching, bending and drawing are of unquestionable utility, as examples are the home appliances, automotive products, etc, these products have several parts produced with thestamping processes...
Optimizing Shared Resources in a Batch Production Process using Genetic Algorithm for Small Production Industry for Different Batch Condition
Mathematical optimization is a process for finding and selecting the best fit values that is used to solve various engineering problems. Along with a complex area, it is important to improve productivity and efficiency f...
Partial Replacement of Cement with Burnt Rice Husk Ash for Low Strength Concrete Production.
Nigeria, one of the leading African countries in economy makes use of sandcrete blocks and concrete for various types of structure in the construction industry. Thereby making cement expensive and unaffordable for many i...
Optimization of Process Parameters in Friction Stir Processing Using Analysis of Variance (ANOVA)
With every industry being replete with ùse of MMC’s, due to the superior mechanical properties they offer, their fabrication has attracted lot of research in recent years. One technique following the footsteps of frictio...
Experimental Investigation of Optimizing En8 and En19 Steels Using Cryogenic Technique With Ansys Results
In general high speed steel is used as a cutting tool for its better quality and reliability at lower rates while compared with other cutting tools. To increase the ability of the tool, the best way is to increase the ha...