Characteristics and disposal options of sludge from a steel mill wastewater treatment plant
Journal Title: Journal of Advances in Environmental Health Research (JAEHR) - Year 2013, Vol 1, Issue 2
Abstract
In the present study, sludge from a steel wastewater treatment plant (SWWTP) was analyzed regarding its physicochemical characteristics and metal contents, and disposal options. For these purposes, grab sampling was used to collect 18 slurry and 18 cake sludge samples in 6 mouth (May-October 2012). Mann-Whitney U test, one sample T-test and Wilcoxon signed rank test were applied to analyze the obtained data. Canadian Soil Quality Guidelines (CSQG) and Florida Department of Environmental Protection Soil Cleanup Target Levels (FDEPSCTLs) were used to discuss the disposal fate of the generated sludge. The results showed that the order of the studied metals in the sludge was as: Fe>Al>Ca>Mg>Zn>Na>Pb>Mn>Cu>Cr>Ni>Co>Cd. It was found that due to higher concentration of Cu, Pb, Zn and Fe in the generated sludge, compared with CSQG and FDEPSCTLs, it is not suitable for residential and non-residential applications.
Authors and Affiliations
Mehdi Ahmadi, Fatemeh Bohlool, Ali-Akbar Babaei, Pari Teymouri
The efficiency of modified powdered activated carbon for removal of ammonia nitrogen from aqueous solution: a process optimization using RSM (Response Surface Methodology), adsorption isotherm and kinetic study
The objective of this study was to determine the performance of modified commercial powdered activated carbon (MCPAC) in removal of ammonia from aqueous solution. The effects of adsorbent dosage (0.5–1.5 g/L), ammonia co...
The simultaneous removal of turbidity and humic substances from water using the enhanced coagulation process
This study aimed to investigate the efficiency of the enhanced coagulation (EC) process for the simultaneous removal of turbidity and humic substances (HS) from raw water from the Sanandaj Water Treatment Plant (SWTP). T...
Improving CO2 adsorption with new amine-functionalized Y-type zeolite
In this work, a new synthesized Y-type zeolite with an Si/Al molar ratio of 2.5 (NaY) was modified with amines, in order to probe the influence of the modification of the adsorbent’s surface on CO2 adsorption. The three...
The evaluation of heavy metals concentration related to PM10 in ambient air of Ahvaz city, Iran
Airborne particulate matter along with volatile organic compounds, heavy metals, and other compounds have raised many concerns to many countries including Iran. In this study, the concentrations of seven heavy metals (Cd...
Removal of p-chlorophenol from aqueous solution using ultraviolet/zerovalent-iron (UV/ZVI)/persulfate process
In this study, degradation of p-chlorophenol (p-CP) was evaluated using persulfate (PS) activated zerovalent iron (ZVI) based ultraviolet (UV) in a bench scale photoreactor. The effect of operational parameters such as s...