Characterization of thermally oxidized titanium based coating
Journal Title: Journal of Achievements in Materials and Manufacturing Engineering - Year 2016, Vol 75, Issue 2
Abstract
Purpose: Aim of the study is to improve the bioactivity of CoCr alloy upon covering the surface with titanium based coating.Design/methodology/approach: CoCr alloy was coated by cold spraying of powder mixture having a composition of 92 wt.%Ti + 8 wt.%Al. Coated samples were thermally oxidized at 600°C for 60 hours. Characterization of the coating was made by X-Ray diffraction analyses, microstructural surveys, cross-section and surface SEM elemental mapping analyses, roughness and hardness measurements.Findings: Results showed that sequential application of cold spray and thermal oxidation processes provided the multi-layered coating consisting of an inner titanium based layer and an outer oxide layer consisted of TiO2 and Al2O3. Thermal oxidation also caused the remarkable increasing in the surface hardness as compared to the as-cold sprayed state. Practical implications: Modifying the surface of CoCr metallic implants for long term success.Originality/value: Producing a multilayer coating on the surface of the CoCr alloy for biomedical application by sequential application of cold spray and thermal oxidation processes is the orginality of the study.
Authors and Affiliations
D. Cetiner, A. H. Paksoy, O. Tazegul, E. Atar, H. Cimenoglu
Keywords
Related Articles
- EP ID EP189328
- DOI -
- Views 130
- Downloads 0
Analysis of integrated management system of the quality, environment and occupational safety
Purpose: In this article the analysis of integrated management system of quality,environment and occupational health and safety was presented. The functioning of suchsystem on the selected enterprise was discussed.Design...
Application of FMEA method for an analysis of selected production process
Purpose: The article presents an application of FMEA method in a process of chimney system production. The analysis allowed to decrease a potential defects and their effects in the analysed process. Design/methodology/ap...
Material characterization for laminated glass composite panel
Purpose: Laminated glass composite panel (LGCP) with at least one flexible plastic/ viscoelastic interlayer is considered. The purpose of this paper is to determine the material properties of the constitue...
Infuence of oxygen and nitrogen plasma treatment on polypropyleme (PP) bumper surface
Purpose: The advantage of plasma treatment is that it modifies only the top few nm of the surface, the modification is uniform and it leaves the bulk properties of the material unchanged. Plas...
Editorial information
Editorial information