CHOSEN TRIBOLOGICAL PROPERTIES OF FeAl ALLOYS
Journal Title: Tribologia - Year 2011, Vol 238, Issue 4
Abstract
This research was focused on tribological properties of FeAl alloys. Powder and cast FeAl alloy was used in this study. The influence of the alloy morphology on its tribological properties is discussed. Tribological tests were performed at room temperature, using a T-05 testing device, under various testing conditions. HS6-5-2 tool steel was used as counter-sample. The tribological set up consisted of a ring (counter-sample) and flat surface of the investigated sample. The effect of tribological testing load on the wear and friction coefficient of the investigated materials was analysed. The obtained results indicated that the morphology of FeAl alloys has significant influence on tribological properties of these alloys and on the mechanisms of wear in particular.<br/><br/>
Authors and Affiliations
Tomasz Śleboda, Janusz Krawczyk, Sylwia Bednarek, Marek Wojtaszek
Keywords
Related Articles
- EP ID EP271510
- DOI -
- Views 54
- Downloads 0
INFLUENCE OF THE TYPE OF FILLER IN GREASE– –THICKENER COMPOSITION ON LUBRICATION EFFICIENCY
These investigations concern the influence of the type of filler in grease modified with solid oils on lubrication efficiency in steel sliding nodes working in mixed lubrication. Based on preliminary works, two commercia...
THE INFLUENCE OF WATER ON THE TRIBOLOGICAL PROPERTIES OF SHOE SOLES
The methodology and the frictional of results of shoe soles made of natural leather, thermoplastic rubber and synthetics rubber cooperating with the samples made of ceramics and wood were presented. The tests were perfor...
ANALYSIS OF THE TRIBOLOGY PROCESSES OF CONTROL VALVES OF MEDIUM SPEED MARINE INTERNAL COMBUSTION ENGINES
The article presents an analysis of phenomena of selected elements of piston internal combustion engines cooperating with the combustion chamber and issues related to tribological aspects. It shows an attempt to assess t...
Wpływ rodzaju i stężenia poliwinylopirolidonów na wybrane charakterystyki tribologiczne ich wodnych roztworów
Związki aktywne powierzchniowo mogą być efektywnymi dodatkami modyfikującymi właściwości smarne wody. Mechanizm ich działania polega na tworzeniu filmu smarnego wzbogaconego o aktywny związek. Wybór poliwinylopirolidonów...
THE EFFECT OF PIT GEOMETRY IN THE SURFACE ON THE TRIBOLOGICAL PROPERTIES OF SLIDING ELEMENTS
The results of investigations of sliding pairs in material matching (e.g. steel-steel) are presented in the article. The examinations were realized with the utilization of a T-11 tester with the modified sliding pair of...