Compaction of porous powder body consisting of the elasticplastic medium
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 7
Abstract
<p>In the development of technological processes of producing cold-pressed sintered parts of low porosity, special attention is paid to the mechanism of density variation. In powder metallurgy, a multicomponent charge consisting of plastic metals, as well as poorly compressible inclusions and compounds, is often used. Such charge can equally be attributed to the charge consisting of iron powder, cast iron and glass. In this charge, the first component (base) is ductile iron, and the other two, cast iron and glass, are elastic components. It is of some interest what kind of compaction can be obtained in this case and what resulting equations can be used to estimate the mechanics of compaction of such a powder charge.</p><p>The resulting equations of compaction of porous powder bodies of iron-cast iron-glass are proposed. The analysis of the isotropic, rigid-plastic hardening material such as iron-cast iron-glass is given. When compacting such a material, the rate of energy dissipation (pressing pressure) is determined by the rate of volume and form change of the body. It is shown that the difference between compressed (cast iron and glass) and plastic compacted (iron) materials forms special mechanical properties of the matrix. Consequently, hydrostatic pressure can affect the form change of the body, and shear stresses – volume change. The results of the mathematical approach to obtaining the resulting equations of compaction of the elastic-plastic medium showed the way to build a theory of plasticity of the compacted body, which eliminates the need to take into account the type of loading surface. When accounting the loading surface, it is impossible to obtain universal equations of compaction of the porous elastic-plastic medium. It is shown that to apply the classical formulation of the model of the elastic-plastic compacted body, it is necessary to assume that the loading surface is convex-closed</p>
Authors and Affiliations
Tahir Jabbarov
Keywords
Related Articles
- EP ID EP528293
- DOI 10.15587/1729-4061.2018.149683
- Views 47
- Downloads 0
Development of technical component of the methodology for projectvector management of educational environments
<p class="a">We propose tools for planning and administration of the technological component of the methodology of project-vector management of educational environments that were implemented in the applied information te...
Establishing the patterns in the formation of oxide films on the alloy Ti6Al4V in carbonic acid solutions
This paper reports results of studying the features of the formation of thin interference-colored oxide films on the alloy Ti6Al4V alloy in solutions of carboxylic acids. It has been established that a change in voltage...
Development of modernized paper filtering materials for water purification, assessment of their properties
<p>Filtering paper materials (FPM), which are easy to recycle, are widely applied to water purification. The main disadvantage of the absolute majority of filtering materials, including paper, is their tendency to biofou...
Development of method of multifactor classification of transport and logistic processes
<p class="a">A method of classification of a set of objects and/or processes in transport and logistics systems on the basis of a multifactor analysis was proposed.</p><p class="a">Combination of the methods of statistic...
Rationale for creating detonation CO2 laser for radioactive surface decontamination
<p>The laser decontamination method is based on the evaporation of oxide films under the influence of radiation. With the evaporation mechanism, laser radiation should heat the upper layer of the film to the boiling poin...