COMPARATIVE RESEARCH OF WEAR RESISTANCE BY FRICTION OF NITRIDING AND CARBURIZED CONSTRUCTIONAL STEELS
Journal Title: Tribologia - Year 2015, Vol 261, Issue 3
Abstract
This work presents the research results of tribological properties of constructional steels of grades 18HGT and 20MnCr5 after nitriding or carburizing. A directly proportional dependence of their wear resistance on the value of their surface pressures was stated. However, wear–friction properties of carburized and nitrided layers did not show any significant differences.<br/><br/>
Authors and Affiliations
Jan SENATORSKI, Paweł MĄCZYŃSKI
THE EFFECT OF OIL POCKET ARRAYS ON FRICTION COEFFICIENT
Experiments were carried out using pin-on-disc tester in conformal lubricated contact conditions for different normal loads. Surface texturing was done using abrasive jet machining with the application of laser cut mask....
THE CHANGE OF FRICTION AND LOAD- CARRYING CAPACITY OF THE JOURNAL BEARING WITH THE CONSIDERATION OF THE OIL AGEING
This paper presents numerical calculations of the hydrodynamic pressure distribution, carrying capacity, and friction coefficient in the gap of a journal bearing. The analysed bearing is lubricated using motor oil. In th...
Ocena wpływu rodzaju napełniacza na odporność erozyjną powłok epoksydowych
Zastosowanie spiekanych biomateriałów ze stali 316L na węzły tarcia endoprotez stawu biodrowego
Wśród zagadnień biotribologii jednym z najczęściej pojawiających się problemów jest wydłużenie trwałości endoprotez stawów. Konieczność zapewnienia korzystnych parametrów tarciowych przy zachowaniu wymogów biozgodności i...
TRIBOLOGICAL PROPERTIES OF VEGETABLE OILS AS POTENTIAL LUBRICANT BASES
The paper presents the test results of the antiwear and extreme-pressure properties of vegetable oils. They were compared to mineral machine oil L-AN 46 without additives. Wear scars were analysed during tribological exa...