Comparative Study of a 1D and 2D Numerical Analysis Modelling a Water Flow at a River Confluence under Accidental High Waters
Journal Title: HIDRAULICA - Year 2018, Vol 0, Issue 4
Abstract
There are presented two numerical simulations – 1D and 2D – regarding the water flow on Timiş River in the Town of Caransebeş, Romania, at the confluence with its tributary Sebeş River. There was considered an accidental high waters wave following the synthetical configuration of a given significant hydrograph that happened from 4th to 11th of April 2000. The flow simulation by the two numerical models analysed by the help of HEC-RAS package aim to estimate the flow configuration, the velocities and levels developments, on a confluence river sector with specific bridge and protection structures. The analysis looks to establish some additional technical aspects regarding the flood defence of the urbanised major river plain or the streambed and framing embankments erosion protection.
Authors and Affiliations
Serban-Vlad NICOARA, Gheorghe LAZAR, Albert Titus CONSTANTIN
Keywords
Related Articles
- EP ID EP486420
- DOI -
- Views 174
- Downloads 0
Algorithm for Optimal Design of Pressurized Toroidal LPG Fuel Tanks with Constant Section Described by Imposed Algebraic Plane Curves
The purpose of this study is to provide a tested, validated, and documented algorithm for optimal design of pressurized toroidal LPG fuel tanks with constant section described by imposed algebraic plane curves. Computer...
Hydraulic Stand for Research of the Correlation between Pellet Quality, Raw Material Quality and Physical-Mechanical Parameters of Manufacturing Equipment
The article has as a defining element the design and development of a hydraulic drive stand on which it is possible to investigate how some chemical-physical parameters of sawdust have influence on the production, and es...
Theoretical Aspects regarding the Pressure Safety Valves Operation within a Hydraulic Circuit
Construction and agricultural machinery and equipment drives are currently accomplished by means of high-performance hydraulic and pneumatic systems through which difficult workloads are easily performed. Such systems ha...
Fluid Flow Particularities within Hydraulic Working Circuit
As is known from the principles of fluid mechanics, the flow phenomenon of the working fluid within a hydraulic circuit is always accompanied by energy losses that are inevitably determined by the frictional forces with...
Studying Transients in Water Supply Systems
Transient operating states occur in water supply systems under pressure. Transient operating states place such extreme loads on the pipes that they might cause burst water pipes, so to be able to avoid damages and operat...