COMPARATIVE STUDY OF BEAMS BY USING DIFFERENT TYPES OF RETROFITING TECHNIQUES
Journal Title: International Journal of Civil Engineering and Technology - Year 2019, Vol 10, Issue 3
Abstract
The main aim of this study was to increase the strength of beams by using different types of jacketing techniques and checks the most cost-efficient methods. In this paper, the reinforced concrete (RC) jacketing and carbon fiber reinforced polymer jacketing was used for retrofitting the beams. In this research study, 100 mm thickness of RC jacketing is used in all four sides of beam and carbon fiber reinforced polymer (CFRP) of different thickness of sheet are used. The point load test is done on loading frame machine and check the crack, ultimate strength and comparing the results and cost of all different types of retrofit techniques for reinforced concrete. Analyses was also performed on ABAQUS software and then validation is done by comparing the deformation and stress behavior in ABAQUS and experimentally. It was observed that the RC jacketing strength increased 63% and 48.5% strength increase in CFRP. The test results show that the RC jacketing gain more strength then other jacketing methods and increase the flexural strength.
Authors and Affiliations
MANSI SAINI and ADITYA TIWARY
Keywords
Related Articles
- EP ID EP46699
- DOI -
- Views 151
- Downloads 0
FACTORS INHIBITING STAKEHOLDER MANAGEMENT OF MEGA CONSTRUCTION PROJECT
The study aims at examining the factors inhibiting stakeholder management of mega construction projects. The study is a case study research where project managers of selected 40 mega construction projects in Lagos, Nig...
TIME AND COST OVERRUN IN DELIVERY OF GOVERNMENT BUILDINGS IN UTTAR PRADESH: THE INVISIBLE CAUSES
Causes of time and cost overrun in delivery of government buildings in Uttar Pradesh are quite complex. These causes may be divided into two categories. One type of causes or factors affects the general efficiency of c...
ANALYTICAL AND EXPERIMENTAL RESPONSE OF SINGLE PILE TO PURE TORSION
Generally, the piles are designed depending on vertical and horizontal loading. The torsional load has a significant impact so it should be taken into account. The torsional loading occurs due to eccentric of lateral l...
MACHINE FOUNDATIONS FOR POWER PLANT: SOME DESIGN ISSUES WITH REAL TIME EXAMPLES
The power generating industry is undergoing an unprecedented reform. Improvement in power plant has provided machines of higher rating with better stability and increased running life. Proposed soil characteristics rep...
THE COMPLEMENT METRIC DIMENSION OF GRAPHS AND ITS OPERATIONS
Let G be a connected graph with vertex set V(G) and edge set E(G). The distance between vertices u and v in G is denoted by d(u, v), which serves as the shortest path length from u to v. Let be an ordered set, and v is...