Comparative Study Of Pre-Planning And Actual Planning Process In Construction Industries
Journal Title: International journal of Emerging Trends in Science and Technology - Year 2014, Vol 1, Issue 2
Abstract
Any project that is going to be involved in construction industry must start with the general planning before engaging with the contractors. Planning is defined as the process of developing the project plan. Planning outlines how the project is to be done by specifying some pre-determined and committed future course of action to achieve its goal. Generally planning is of two types namely Pre-planning and Actual planning. Pre-planning summarizes the detailed information about productivities and work volumes in building construction. Actual planning is any changes in the on-going process due to the above said factors are rectified. This study aims at collection of data regarding Pre- planning and Actual planning. A comparative study is to be done about the failures and drawbacks of the Pre-planning and success of the Actual planning using Microsoft Project.
Authors and Affiliations
B. Annalakshmi
Keywords
Related Articles
- EP ID EP220205
- DOI -
- Views 173
- Downloads 0
Design of UWB Monopole Antenna with EBG Structure and Ground with Rectangular Slots
In this paper a low cost, simple and small size ultrawideiband circular monopole antenna is designed. The notch band is created by multiple number of slots in the ground plane. The proposed antenna is designed on the FR-...
Design of Cross-Layer for Internet of Things
Internet of things nowadays is transforming into prevalent step by step in our ordinary presence. The clients are anticipating apply uncommon innovation which incorporates Bluetooth, WLANs based at the IEEE 802.11 prereq...
Impact of Family Planning A Way to Socio- Economic Upliftment
When the family is small whatever little they have they are able to share there is peace” Family Planning is the planning of every individual and couples in their life to decide and attain their desired number to have ch...
Pre – Destining the Quality of Plastic Parts Produced By Injection Molding Method Using Computer Simulation Techniques
In this paper attempt has been made to eliminate the errors during each step while designing and analysis of the component to minimize the defects during manufacturing of the component. Air filter bottom box component wa...
Security in Video Conferencing Using Video Stegnography
I describe a steganographic system which embeds secret messages into a video stream.I examine the signal path which typically includes discrete cosine transformation (DCT) based, lossy compression. Result is the technica...