Comparative study of stress distribution in Astra and Xive implant systems and in surrounding bone. A numerical analysis
Journal Title: Prosthodontics - Year 2015, Vol 65, Issue 2
Abstract
Introduction. Localization and value of stress in implant and surrounding bone is influenced by the way the implant and abutment are connected. Initial (mounting) stress formed by the implant to abutment connection with a screw plays also an important role in the stress distribution. Initial stress may cumulate with stress released by implant loading during mastication and accelerate bone loss around implants.Aim of the study. To compare the distribution of both mounting stress and stress caused by external forces in abutment to implant and implant to bone interfaces.Methods. Numerical models and calculations were carried out using MSC MARC/Mentant system.Results. Stress resulting from mounting tension in bone surrounding Xive and Astra Tech implants were 13.5 MPa and 8.5 MPa, respectively. Bone stress resulting from external load was up to153% higher around Astra implants compared to Xive implants.Bone stress resulting from mounting tension and external load is more equally distributed around Xive implants. On the other hand, bone stress around Astra Tech implants was distributed on a larger area, however, its value was higher.Conclusions. 1. Numerical analysis revealed that bone stress around implants resulting from both mounting tension and external cross load are significantly lower around Xive implants compared to Astra Tech implants. 2. All Xive implant system elements (implant, screw, abutment) are more resistant to deformation resulting from external cross load.
Authors and Affiliations
Daria Basmadji, Stanisław Kut, Zdzisław Bereznowski
Keywords
Related Articles
- EP ID EP64886
- DOI -
- Views 100
- Downloads 0
Właściwości na zginanie wkładów koronowo-korzeniowych wzmocnionych włóknem szklanym i wkładów metalowych: badanie metodą testu trójpunktowego
Wprowadzenie. Od dwóch dekad wkłady koronowo-korzeniowe wzmocnione włóknem szklanym FRC wykorzystywane są w stomatologii odtwórczej. Wkłady o większej wytrzymałości na zginanie zapewniają większą wytrzymałość odbudowanym...
The aplication of precision attachments OT Equator profile in prosthetic rehabilitation of patients following surgery of the floor of the mouth neoplasm
The prosthetic treatment of an edentulous mandible with a conventional complete denture does not always give satisfactory results. It gets even more complicated in patients after cancer surgery with losses of oral tissue...
Biofunctional Prosthetic System in implant – prosthetic treatment
In the group of edentulous patients with difficult prosthetic conditions and limited possibilities to adapt to removable dentures, the prosthetic treatment using conventional methods can be unsatisfying both for the pat...
Zastosowanie metody biofunkcjonalnej w rehabilitacji protetycznej pacjenta po zabiegu operacyjnym w obrębie twarzoczaszki
Leczenie protetyczne pacjentów po zabiegach operacyjnych w obrębie części twarzowej czaszki jest obarczone dużymi trudnościami z powodu specyficznych warunków podłoża protetycznego. Ważne jest zatem poszukiwanie metod le...
Prosthetic rehabilitation of the stomatognathic system in patients with ectodermal dysplasia on the basis of case reports
Ectodermal dysplasia is a rare congenital, hereditary disorder that can affect many ectodermal structures. The treatment of ED cases is difficult and requires the cooperation of doctors specialized in various dentistry d...