Comparing the ZnO/Fe(VI), UV/ZnO and UV/Fe(VI) processes for removal of Reactive Blue 203 from aqueous solution
Journal Title: Environmental Health Engineering and Management Journal - Year 2019, Vol 6, Issue 1
Abstract
Background: Wastewater contaminated with dyes such as Reactive Blue 203 can produce a lot of health problems if it is released into the environment without a suitable treatment. Although there are several studies on dye removal from wastewater, removal of Reactive Blue 203 has not been investigated by hybrid methods. Therefore, the aim of this study was to investigate the removal of Reactive Blue 203 from aqueous solution, using combined processes of zinc oxide (ZnO) nanoparticles, Fe(VI) oxidation process, and UV radiation. Methods: The removal of dye from aqueous solution using ZnO nanoparticles, Fe(VI) oxidation process, and UV radiation was individually evaluated. Then, the results of combined methods were compared. Hydraulic retention time (HRT), pH, and temperature were the most important factors which were investigated in this study. Results: ZnO nanoparticles, Fe(VI) oxidation process, and UV radiation were able to remove 97%, 71%, and 47% of the dye in the optimal conditions, respectively. Also, the removal of dye using combination of Fe(VI) oxidation process/UV radiation, ZnO nanoparticles/Fe(VI) oxidation process, and ZnO nanoparticles/UV radiation under optimum conditions was 100%. It seems that the combined methods were significantly more effective than the methods alone for removal of dye from water. Conclusion: UV radiation alone is a simple and efficient method for removal of Reactive Blue 203 from water. Removal of Reactive Blue 203 using Fe(VI) oxidation process can be completed in a fraction of second, therefore, it can be categorized as a rapid reaction.
Authors and Affiliations
Amirreza Talaiekhozani , Farhad Banisharif , Maryam Bazrafshan , Zeinab Eskandari , Abbas Heydari Chaleshtari , Ghasem Moghadam , Ali Mohammad Amani
Keywords
Related Articles
- EP ID EP45323
- DOI 10.15171/EHEM.2019.04
- Views 506
- Downloads 0
Study of the effectiveness of the third generation polyamideamine and polypropylene imine dendrimers in removal of reactive blue 19 dye from aqueous solutions
Background: Dye and colored materials cause health risks in water and therefore, must be removed from water supplies and wastewater. The aim of this study was to evaluate the effectiveness of the third generation poly(am...
Study of the effect of sodium alginate coating containing pomegranate peel extract on chemical, sensory and microbial quality of walnut kernel
Background: Due to the adverse effects of artificial preservatives on food and its harmful effects on human health, researchers have been considering replacing these materials with natural substances. In this study, the...
Comparison of heavy metals contamination and ecological risk between soils enriched with compost and chemical fertilizers in the North of Iran and ecological risk assessment
Background: Nowadays, uncontrolled use of chemical fertilizers in agriculture is one of the reasons for the entry of heavy metals into the environment. In this study, the heavy metals contamination of the soils enriche...
Optimizing bioethanol production from cassava peels through agitation timing variation in separate hydrolysis and co-fermentation
Background: This study assessed the effect of various agitation timings on bioethanol production from cassava peels (CP) using separate hydrolysis and co-fermentation (SHCF) technique. Methods: The milled CP was divide...
Assessment of ecological risk and identification sources of polycyclic aromatic hydrocarbons at coastal sediments: A case study in Bushehr Province, Iran
Background: Polycyclic aromatic hydrocarbons (PAHs) are stable and highly toxic environmental pollutants, which are produced mainly through combustion processes. The present study aimed to identify and determine PAHs com...