COMPARISON OF ENERGY EFFICIENCY OF THE MUNICIPAL WASTE TREATMENT PLANT IN KRAKOW AND BIALYSTOK
Journal Title: Structure and Environment - Year 2018, Vol 0, Issue 4
Abstract
Thermal treatment of municipal waste is a method that has been rediscovered in Poland in recent years. National installations for thermal treatment of municipal waste launched in recent years draw on the experience of plants around the world and they use repeatedly proven technologies. Poland, within the framework of EU commitments, must reduce the amount of biodegradable waste going to landfills to 35% by weight of the total municipal waste by July 16, 2020. Other biodegradable waste that can not be recycled should be subjected to biological or thermal decomposition. The purpose of this publication is to determine the efficiency of Polish installations for the thermal treatment of municipal waste, by comparing the energy efficiency ratio of installations in Kraków and Bialystok. These are two of the six installations of thermal waste treatment, which were created in 2015-2016. The Krakow incineration plant is the largest, and the Białystok one of the smallest.
Authors and Affiliations
Paweł Jędrzejowski, Jolanta Latosińska, Paulina Masternak, Piotr Michno
Keywords
Related Articles
- EP ID EP535081
- DOI 10.30540/sae-2018-032
- Views 108
- Downloads 0
INFLUENCE OF HYDRATED LIME ON THE PROPERTIES OF FILLER-BITUMEN COMPOSITE
To guarantee the quality of warm mix asphalt, one of the prerequisites is to provide adequate adhesion between the bituminous binder and the aggregates. To achieve this goal, filler-bitumen mixes were examined with a rep...
THERMAL COMFORT IN UNIVERSITY COMPUTER LABORATORIES
Thermal comfort defines the state of satisfaction of a person or a group of people with thermal conditions of the environment in which the person, or the group of people is staying. The state of satisfaction depends on t...
AN ACCURACY ASSESSMENT OF SPOT HEIGHTS ON DIGITAL ELEVATION MODEL (DEM) DERIVED FROM ALS SURVEY: CASE STUDY OF ŁYSICA MASSIF
The paper presents an analysis of ALS – derived DEM (created as part of ISOK project) of Łysica massif in Łysogóry range, Poland. The contour map, slope map, and cross sections of the massif were derived of DEM, and comp...
CALCULATIONS OF INDIVIDUAL AIR SUPPLY SYSTEMS
The article presents a method for calculating the amount of air flowing in and flowing out of the building. It included two variants: the first – the air inflow by infiltration and by the individual duct of the supply sy...
DEFECTS IN STRUCTURAL TIMBER
The paper presents the defects that are typically found in structural timber. The model of the so-called flawless timber has been made more precise. Additionally, the impact of defects on timber quality was characterised...