Comparison of transformation 3D scans
Journal Title: Геодезія, картографія і аерофотознімання - Year 2017, Vol 86, Issue 2
Abstract
Purpose. The purpose of this study is to determine the reliability of the results obtained using a fully automatic method for orienting scans. The results are determined in two different common software tools and compared with the results of scanning scans by combining common points using special marks - 3D spheres. Methodology. A technique is proposed based on the creation of several scanning stations at a short distance and one at a relatively larger distance. One of the distant from the scanned stations will be determined by the basic. This station should cover all the reference points and objects, which will be used to register the scans, as well as most of the scanned object. The control of the obtained results will be carried out by modeling the surface of 3D spheres and their comparatively. Results. In 2015, during archaeological excavations at the corner of Krakow-Armenian streets, the task was to fix the boulders of historical buildings. These residues were a wall with a length of about 24 m. To ensure the completeness of the information, a terrestrial laser scanning was used as an optimal method for 3D surveying of long complex structures in the structure of objects. For a minimal effect of the orientation error of scans and a reduction in the preparatory work for scanning, the baseline scan method with a high overlap level was used and the results of the scanning orientation were investigated. Originality. The proposed technique for performing terrestrail laser scanning provides an iterative method of searching for the closest point. The way to monitor the results obtained is the most reliable from a practical point of view, because it is based on comparison of the location of point groups and 3D modeling. Practical significance. The use of the applied methods makes it possible to significantly shorten the time for conducting field work on laser scanning, to obtain data with minimal influence of the misleading registration of scans.
Authors and Affiliations
A. Y. Malitskyi
Keywords
Related Articles
- EP ID EP483759
- DOI 10.23939/istcgcap2017.02.058
- Views 152
- Downloads 0
Dnister PSPP control GNSS network оptimization
Goal. The development of conceptual frameworks and proposals to optimize the geometry of Dnister PSPP control GNSS network and to identify ways to improve the accuracy of GNSS measurements. Methodology. To select optimal...
Application of remote sensing methods to evaluation of soil fertility indicators of Zakarpattia lands
Aim. Identification and evaluation of the soil fertility indicators based on processing of the data of on-ground and remote sensing research on the agricultural lands of different landscape zones in Zakarpattia. Меthodol...
Methods and results of research kinematic determinations of the different GNSS-receivers
Purpose. This study assumed: experimental determination of the accuracy of coordinates of points of the geodetic network dual-frequency GNSS receivers from different manufacturers under different conditions of observatio...
Construction of the normal equations matrix for modeling of local gravitational field
We consider the method of constructing the local gravity field using nonorthogonal basic functions, which are solution of the Laplace equation in spherical cap or spherical segment. This approach involves using of associ...
Investigation of the accuracy of plans of Lviv in 1844 and 1932
Purpose of this work is the investigation of the accuracy of plans of Lviv in 1844 and 1931. Methodology. The main criterion for evaluation of the authenticity of ancient maps is the study of their geometric accuracy, wh...