Comparisons Among p - Channel, n-Channel and Mixed n/p Channel OTFTs
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2016, Vol 40, Issue 40
Abstract
Some theoretical approaches of an alternative organic semiconductor device are presented in this work. The Organic transistors are based either on n-type or p-type or mixed p/n overlapped layers. The carrier modulation insides different films is carried out by two gates electrodes, as is usual in the thin film transistor field. This paper introduces some novel aspects for these kinds of organic transistors, selecting a suitable biasing regime. The simulations emphasize a stronger influence on the static characteristics when the superior gate is acted. One of the novelties of this paper concerns the electrical conduction occurrence by two simultaneous channels, in comparison with one volume channel conduction, for different gate voltage regimes. A similar work regime is also encountered in the SOI devices with ultra-thin films that develop a volume channel. The volume channel regime is advantageously when the technology of fabrication of the organic semiconductors on different insulators provides an extremely charged interface, which can degrade the surface currents. Comparisons and applications for both situations – with one volume channel or two accumulation channels – are finally discussed. The vertical n/p junction arose between the upper n-channel and the bottom p-channel, offers novel physical properties and prevented any interaction among channels. The device simulations revealed multiple behaviors, depending on the Top and Bottom Gate voltages, if a positive drain-source voltage is applied.
Authors and Affiliations
Cristian Ravariu, Georgeta Alecu
Keywords
Related Articles
- EP ID EP263667
- DOI -
- Views 126
- Downloads 0
Some Considerations Concerning Radiated Emissions Produced by a Board Display
The paper presents some considerations related to the radiated emissions from automotive area of interest. Firstly the equipment used for tests dedicated to radiated emissions is presented. Afterward some considerations...
How to Design a Passive Damped LCL Coupling Filter for an Active DC-Traction Substation
The attention in this paper is directed to the design of a passive damped LCL filter intended to connect the voltage source inverter of an active DC-traction substation to the AC-power supply. Based on the tasks to be fu...
Control circuit of an Electronically Controlled Capacitor for the Optimization of the Single Phase Induction Motor
The control circuit of an Electronically Controlled Capacitor (ECC) for the optimization of the Single Phase Induction Motor (SPIM) with auxiliary winding is presented. The control circuit is based on a fixed value...
Predictive versus Classic Control of the Induction Motor Drives
The paper deals with techniques which use the predictive concepts in order to obtain both the pulse width modulation strategy of a voltage fed inverter and the predictive control of the induction motor drive. Concerning...
Load Flow Analysis of Unbalanced Distribution Networks using Symmetrical Components Based Software
This paper presents the algorithm and the main features of a Matlab (R2014a)-based software conceived by the authors for analysis of the asymmetrical operation of the three-phase distribution networks. The software’s alg...