Computer Aided Design and Production Analysis of Vane Pump
Journal Title: RECENT - Year 2014, Vol 15, Issue 43
Abstract
This article represents an approach for CAD/CAM-based development of technological, constructional documentation of a rotational pump regarding its assembling. An approach for computer-based designing and assembling of the pump has been invented on the basis of pre-created 3D geometrical models of the compound details and the assembled unit as well as on a basis of a virtual, technological analysis of the pump. A constructor can demonstrate his/her skills and knowledge in the process of development of the compound details by using the already generated, summary drawing of the pump. In order to provide full exchangeability of the main, compound details, an analysis has been made as it concerns manufacturability of the dimensioning and assembling of the details on the basis of computer-made simulations. All of the results that have been obtained are required for the purpose of Computer Aided Manufacturing that is to be performed by the technologists. They are also useful for the purpose of training of students and specialists that have to acquire knowledge and skills through the work with contemporary CAD/CAM software products.
Authors and Affiliations
Georgi DINEV, Petar ANGELOV
Keywords
Related Articles
- EP ID EP110979
- DOI -
- Views 68
- Downloads 0
Model-Based Fault Diagnosis in a Waste-Processing Industrial System via Causal Graphs
The paper describes a Casual Graph (CAG) approach to fault diagnosis of industrial systems, based on logical and qualitative methodology for modelling the diagnostic aspects of a system structure and behaviour. The main...
Influence of Adhesive Bonded Surface Texture on Adhesive Bonding Process
Laboratory experiments deal with an influence of a grit-blasting by means of corundum grits AL2O3 of different sizes on a surface roughness of steel substrates prepared according to the standard CSN EN 1465. The experime...
Computer Aided Selection of Material Handling Equipment
Implementing automated material handling system improve the productivity and profitability of a company. Despite these advantages, implementing such a system implies investments thus the increase of the product’s cost. T...
Tool Management in the Production System
The paper herein puts forth a few introductive notions connected to managing the tool flux within an enterprise. The notion of „tool flux” is defined, enhancing the differences from the material semi-manufactured product...
The Corrosion Characterization of Ti-Si-C Thin Films Obtained by Magnetron Sputtering Deposition
Nano-composite layers, formed by a mixture of crystalline or amorphous nano-phases, which include Ti-Si-C type layers, obtained with the help of the PVD process, have attracted lately a wide interest both in research, an...