Computer modelling characteristics of ballast choke of the fluorescent lamp
Journal Title: Вісник Тернопільського національного технічного університету - Year 2015, Vol 77, Issue 1
Abstract
Basing on the analysis of existing structures of the planar system induction coils authors proposed to fill the space between the turns of the coil by the ferromagnetic material. This design will increase the magnetic inductance, and will not increase of the dimension parameters. As the magnetic material nickel-zinc ferrite with specific resistance was chosen. Modeling of magnetic and temperature characteristics was conducted by the Comsol Multiphysics software. It is shown that proposed construction of magnetic makes possible to get get the necessary inductance and quality factor of choke in comparison with traditional designs of magnetic circuit. Based on the investigations, the authors proposed the recommendations concerning the choice of optimal parameters of inductive element, taking into account the index of operating current. It is shown that the small increase of inner orifice radius gives the opportunity to increase inductance with the small change of element’s sizes, while the index of quality factor stays practically unchangeable. Based on the simulation of magnetic and thermic field of choke, it is shown that the layers of insulating material serve as non-magnetic air gap. The elaborated computer model lets choose its thickness for providing the stationary inductance index in the process of remagnetizing. According to the carried out research the operating temperature of the choke doesn’t exceed 70 °C. Such temperature is northing operating temperature range of choke materials, besides it won’t cause the excessive heating of surrounding components in the scheme during operating. The quantity of heat consumptions that in the coil and consumptions in the magnetic circuit is three times less than those with traditional types of magnetic circuit. The simulation (modeling) of work of the discharged stage operating of electronic starting system set in the established mode is held. It is showen that the proposed design of ballast choke provides the necessary indexes of voltage and current during the operating of the luminescent lamp. Due to the reduction of heat consumptions the proposed design increases the efficiency of luminescent lamp power supply system
Authors and Affiliations
Volodimir Andriychuk, Myroslav Nakonechniy
Keywords
Related Articles
- EP ID EP571964
- DOI -
- Views 65
- Downloads 0
Physical-chemical regularities of steel refining from non-metallic inclusions
Using the thermodynamic analysis, the possibility of a colloid interaction of the dispersed phase with a dispersed medium, the possibility of coagulation of the non-metallic phase, has been determined. It is established,...
Probabilistic modeling of physical damage processes of fiber-reinforced composite plates under dynamic loading
Probabilistic material model for strength analysis of a composite taking into account the evolution of damage of bonds between its structural elements based on the analysis of physical damage processes of the internal st...
About short – and long – term strength of building constructions elements restored using injection technologies
The paper is devoted to the important scientific, technical and practical problems of predicting both service life time and strength of damaged structure elements over long-term operation, bearing capacity of which was r...
Instrument for inner cylinder surfaces vibrating rolling and its structural parameters determination technique
Design of instrument for regular topography making by vibrating rolling on inner cylinder surfaces has been developed. It provides vibrorolling effort regulation for the materials with various physical and chemical prope...
An exact series solution for free vibration of cylindrical shell with arbitrary boundary conditions
Simple accurate formulas for the natural frequencies of circular cylindrical shells are presented for modes in which transverse deflection dominates. Based on the Donnell-Mushtari thin shell theory the equations of motio...