Conception of the experimental verification the modeling of the heat lodas of the chosen elements of a combustion chamber of the turbocharged diesel engine
Journal Title: Scientific Journals of Silesian University of Technology. Series Transport - Year 2012, Vol 2012, Issue 77
Abstract
In this paper was presented result of the mathematical modeling of the heat loads in the piston, cylinder sleeve, valves and valves-seats. In calculations used the two-zone combustion model and finite elements method (FEM). Modeling was conducted by use of III kind of the boundary conditions. Moreover in the article were described individual preparation stages of the research object for the experimental verification of received the numerical results along with the concept of the measurements station.
Authors and Affiliations
Aleksander HORNIK, Piotr GUSTOF
TECHNIQUES OF BAGGAGE HANDLING AT PASSENGER AIRPORTS – BHS SYSTEM
The paper presents techniques and technologies of baggage handling in passenger air transport services. It is very important logistics process for efficiency material flow as baggage which supports main passenger transpo...
POST ACCIDENTS TRUCK FRAMES WELDING WITH BASIC COATED ELECTRODES WITH ADDITION OF MOLYBDENUM
Plastic properties of welded join in frame of truck was analyzed. Joints were made by standard basic electrodes and laboratory electrodes with an addition of molybdenum. Toughness samples were cut out from prepared joint...
HARMONIC DRIVE SELECTION
The variety of types and sizes currently in production harmonic drive is a problem in their rational choice. Properly selected harmonic drive must meet certain requirements during operation, and achieve the anticipated s...
BADANIE PRZEPUSTOWOŚCI SKRZYŻOWANIA W WARUNACH TYMCZASOWEJ ORGANIZACJI RUCHU
Artykuł zawiera prezentację wyników badań przepustowości skrzyżowania z sygnalizacją świetlną, na którym wprowadzono tymczasową organizację ruchu. Sprawdzono także wpływ zmian w organizacji ruchu – wprowadzonych na czas...
SURFACE STRENGTH OF NOVIKOV CONVEXO-CONCAVE GEARS
Article presents the algorithm for obtaining maximum surface stresses for Novikov gears. Described surface strength calculation method is based on Hertz theory of two bodies being in point contact. What’s more the influ...