Conditions for using digital isolators in intrinsically safe applications
Journal Title: Mining – Informatics, Automation and Electrical Engineering - Year 2017, Vol 529, Issue 1
Abstract
This article highlights the issues related to the use of the galvanic separation of digital circuits by employing modern digital isolators in intrinsically safe applications. The authors refer to the requirements of suitable standards and directives and present their interpretation. They also identified limitations related to the use of digital isolators in intrinsically safe circuits.
Authors and Affiliations
Sławomir Chmielarz, Tomasz Molenda, Piotr Szymała, Wojciech Korski
Keywords
Related Articles
- EP ID EP279022
- DOI 10.7494/miag.2017.1.529.43
- Views 170
- Downloads 0
Study of functional performance improvements for cutting teeth mounted on bucket wheel excavators operating in Oltenia coal basin – Romania
The values of the resultant forces acting on the cutting teeth of BWEs can either be calculated or determined using experimental methods. Based on this, the position and parameters of the working organs during the cuttin...
How to assess and improve the quality of voice services in telephone communication and alarm systems in mines
The article presents selected objective and subjective methods to assess the quality of voice services in telephone communication. The authors described the impact of the line and acoustic echo phenomena and ambient nois...
Integrated control system of main fans station for deep mines ventilation
The article describes a complete control system of the main fans system with an integrated remote control and monitoring system. A power supply system and communication diagram were presented. Co-operation between partic...
Integrated system for monitoring and analysis of methane hazards in the longwall area
Polish hard coal mines with high methane explosion hazards commonly use systems for automatic monitoring of air parameters. These systems are used by ventilation personnel in preventive actions, simulation tests and desi...
Breakdown of hoisting machine in mining shaft hoist installed in southern section of R-II shaft of KGHM Polska Miedź S.A. O/ZG Rudna
This article applies to a one-of-its-kind case of the cracking of the main shaft of a hoisting machine that occurred in the southern section of the R-II shaft of KGHM Polska Miedź S.A. Oddział ZG “Rudna” in 2011. The min...