Conformance Testing of Non-PoE Devices in a PoE Enabled Network

Journal Title: GRD Journal for Engineering - Year 2017, Vol 2, Issue 6

Abstract

Ethernet for Data transfer in Computer Networks is ubiquitous. However some recent advancements in DC Powering have enabled transporting power and data simultaneously, over the same Ethernet cables. This technique is known as Power over Ethernet (PoE). However there are few challenges though, the first and the foremost being that of operational safety of the devices which are not PoE compliant. It needs to be noted that IEEE 802.3af standard specifies a 15W of PoE power at 48Volts DC which if connected to an incompatible device, may end up damaging it, permanently. Hence it is important that a PoE Equipment is tested and confirmed that it allows for safe and reliable operation of non-compliant devices. Failure to confirm this may have a catastrophic impact on the network that could range from a network crash to an imminent fire hazard. This paper discusses important tests which need be performed to ascertain that the PoE equipment being connected in the network will allow for safe and reliable operation of incompatible or legacy network devices. A LTSPICE simulated PoE network has been considered to carry out these various tests as well as for the verification of the safety features incorporated in the PSE-PD combination and its compliance to IEEE 802.3af standard. The observations and results are tabulated and conclusions are drawn.

Authors and Affiliations

Chodankar Deepak P

Keywords

Related Articles

Use of Water Quality Index Result of Robertson Lake Jabalpur in Remote Sensing Application

The water of Robertson Lake is suffering from severe contamination which is due to heavy discharge of pollutants without adequate treatment to remove harmful compounds. This is leading to the damaging effects not only to...

Design Optimization using Crowdsourcing

Crowdsourcing is the disperse problem solving model in the domain of Data mining that has emerged in recent years. Crowdsourcing is designed to relieve the user from the burden dealing with the crowd. The Motivation of t...

Placing Concrete by Pumping

Concrete is a composite material obtained by mixing cement, sand, aggregates with water in suitable proportions. Concrete after mixing has to be transported at the final positions before setting takes place. Placing of c...

Study of Urban Land Management Techniques Followed in India

Land is a resource and at the same time, it is non-renewable. So it should utilize very carefully. The constitution of India grants the right to acquire hold and dispose of property to every Indian citizen. It, however,...

Recent Development in Stealth Considerations for Surface Warship Design

The past two decades have seen a significant shift in design process to incorporate stealth features to make naval ships invisible to an array of modern electronic warfare systems such as sonar and radar, combining ways...

Download PDF file
  • EP ID EP224439
  • DOI -
  • Views 104
  • Downloads 0

How To Cite

Chodankar Deepak P (2017). Conformance Testing of Non-PoE Devices in a PoE Enabled Network. GRD Journal for Engineering, 2(6), 64-71. https://europub.co.uk./articles/-A-224439