CONSIDERATIONS ON ACTIVE REDUCTION NOISE, TREATMENT AND CONTROL DESIGN PERFORMANCE AT DIESEL GENERATOR
Journal Title: ROMANIAN JOURNAL OF TECHNICAL SCIENCES - APPLIED MECHANICS - Year 2011, Vol 56, Issue 2
Abstract
This paper discusses the methodology and results of a noise audit and active control testing on a portable single-cylinder diesel generator. Using a large microphone array, a spectral intensity map of all external surfaces of the generator set was constructed from experimental measurements. Two primary noise sources were measured: a relatively directional high-frequency structurally-coupled engine component, and low-frequency fundamental exhaust firing-order harmonics. The lowfrequencies were reduced using the feed-forward Filtered-X LMS with a reference derived directly from the electrical generator coupled to the diesel engine.
Authors and Affiliations
CRISTIANA VOICAN, C. D. STĂNESCU
Keywords
Related Articles
- EP ID EP177616
- DOI -
- Views 52
- Downloads 0
LATERAL TORSIONAL BUCKLING RESISTANCE OF CASTELLATED BEAMS
Castellated beams are likely used structural elements in building structures especially in deck systems and in steel frames. The castellated beams are usually produced by cutting a traditional I-girder and welded by crea...
INVERSE DYNAMICS OF THE CINCINNATI-MILACRON WRIST ROBOT
Recursive matrix relations in dynamics of the Cincinnati-Milacron wrist robot are established in this paper. The prototype of this mechanism is a three-degrees-of freedom spherical system with six moving links and three...
A PREISACH MODEL FOR HYSTERETIC DESCRIPTION OF NATURAL MAIZE COMPOSITES
The work is focused on the hysteretic behavior of a composite made out of stalk based maize fiber and unsaturated polyester resin polymer as matrix with methyl ethyl ketone peroxide as a catalyst and Cobalt Octoate as a...
EXPERIMENTAL AND NUMERICAL STUDY OF LOW VELOCITY IMPACT ON SANDWICH PANELS WITH ALUMINUM FACESHEETS AND FOAM CORE
This study investigates the effect of foam core type in sandwich structures under low velocity impact. The structures consist of aluminum facesheets and polystyrene and polyurethane foam core with density of 32 kg/m3 , r...
EDITORIAL OF THE SPECIAL ISSUE “RECENT RESEARCH ADVANCES IN AUTOMOTIVE ENGINEERING”
EDITORIAL OF THE SPECIAL ISSUE “RECENT RESEARCH ADVANCES IN AUTOMOTIVE ENGINEERING”