Construction Settlement Monitoring and Control Measures for Mining Method Tunnel Section by Cutting Piles Closely Under-passing Existing Metro Station
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 6
Abstract
Objective When the sectional tunnel closely under-passes the existing metro station by cutting piles, it has a significant impact on the deformation of the upper station. In order to ensure the safety of construction, it is necessary to take effective measures to control the settlement of metro station. Method Based on the project of a sectional tunnel under-passing the existing metro station, a three-dimensional numerical model is established to analyze the station settlement when being under-passed by cutting piles without settlement control measures. The settlement control effects with measures such as addition of temporary inverted arches, staggered excavation, and grouting reinforcement are studied. A multiple measure combination control scheme is proposed, and its feasibility is verified by the measured engineering data. Result & Conclusion The research results indicate that when the tunnel underpasses the station directly by cutting piles without taking settlement control measures, the maximum settlement of the station will exceed the specified limit. The grouting reinforcement produces the best effect on settlement control with the settlement being reduced by 57.3%. Addition of temporary inverted arches follows next by 40.4%, and staggered excavation has the least effect by 20.8%. The settlement limit can be met by using the multiple measure combination control scheme, which is verified to be feasible by the monitoring data, and can provide reference for similar projects.
Authors and Affiliations
Tao XU
Keywords
Related Articles
- EP ID EP737756
- DOI 10.16037/j.1007-869x.2024.06.027
- Views 61
- Downloads 0
Application of Lean Production Manufacturing Execution System in the Context of Intelligent Manufacturing
Objective In the context of intelligent manufacturing, the MES (manufacturing execution system), targeting the production line execution layer, is a core component of the information management system. With the rapid pro...
Fault Diagnosis Method for Control Circuit of ZDJ9 Double-machine Traction Speed-up Turnout Electric Switch Machine
［Objective］ In the ZDJ9 double-machine traction speed-up turnout electric switch control circuit, 1DQJ is an instantaneous suction relay. When the outdoor switch circuit does not form a loop, that is, in the event of a...
Optimization Design Scheme for Aerodynamic Noise Reduction in Pantograph Area of High-speed Railway EMU
［Objective］ With the increase of train operating speed, noise levels have gradually become a critical factor restricting the development of high-speed railways. It is essential to explore the potential for positive aer...
Automatic Train Operation System Based on Vehicle Deep Integration
Objective Conventional ATO (automatic train operation) systems lack a direct, real-time, and bidirectional data exchange with the vehicle traction/braking systems. In the vehicle control process, information on the vehic...
Vehicle Formation Scheme for Wuxi Metro Line 5
Objective To somewhat address the issues of low passenger load factor, high operating cost, and excessive reliance on government subsidies in medium-sized urban rail transit network, taking Wuxi Metro Line 5 as example,...