CONTROL GAS NITRIDING PROCESS: A REVIEW
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2019, Vol 42, Issue 1
Abstract
The detailed surface is the boundary between the machine part and the working environment or with other machine parts in the structure of the machine. The surface is directly affected by the mechanical, physical and chemical effects of the environment. It is also the first place to receive loads, often subject to friction, abrasion The surface of the machine is where the hardest working conditions are, so it is also vulnerable to abrasion. There are many methods to the durable surface; But the most common method is diffusion. In diffusion method, there are many methods, but the chapter only focuses on the gas nitriding method and control of the gas nitriding process. Nitriding process can only be best achieved by control of the gas nitriding process, in particular by controlling the amount of incoming air at each stage. The specifications of the gas nitriding process will determine the quality of the nitriding layer. One of the very difficult parameters to control this process is the concentration of NH3 and N2 into the air. In order to control this air which will use the air control equiments but to control the permeability components in the equipment need special control processes with modern equipment. In this paper, we present a technique for control of the gas nitriding process by sensor hydro.
Authors and Affiliations
Nguyen Duong Nam, Nguyen Anh Xuan, Nguyen Van Bach, Le Thi Nhung
Keywords
Related Articles
- EP ID EP473789
- DOI 10.26480/jmerd.01.2019.17.25
- Views 58
- Downloads 0
EFFICIENT MODELLING AND SIMULATION OF WIND POWER USING ONLINE SEQUENTIAL LEARNING ALGORITHM FOR FEED FORWARD NETWORKS
In this paper, an online sequential learning algorithm known as online sequential extreme learning machine (OS ELM) is applied to simulate the power output of a wind turbine. The OS ELM is used both in 1-by-1 and chunk-b...
DESIGN OF SOLID WASTE SEPARATION EQUIPMENT IN BAGHDAD CITY
A massive number of weapons and solid waste are experienced since 1980 in Baghdad. The new government was forced to bury the solid waste in vast tracts, which is limited to waste pressing only without any separation proc...
INVESTIGATION ON THE MECHANICAL PROPERTIES OF PLA & ITS COMPOSITE FABRICATED THROUGH ADVANCED FUSION PLASTIC MODELLING
Advanced Fusion plastic modelling (AFPM) based rapid prototyping (RP) technique was emerged as one of the potential Technologies for serving numerous three-dimensional product for tool design purposes. Primarily, Poly La...
NETWORK INTRUSIONS DETECTION AND PREVENTION METHOD USING A TEAM OF INTELLIGENT AGENTS
An intrusion is defined to be a violation of the security policy of the system; intrusion detection thus refers to the mechanisms that are developed to detect violations of system security policy. Intrusion detection is...
GEOMETRIC VISUALIZATION OF THE PROBLEM OF MEDICAL DIAGNOSTICS BIOMETRIC DATA OF THE BIOSENSOR PLATFORM
The aim of the work is to study the algorithmic solutions of non-invasive medical remote monitoring of human health based on the wearable biosensor platform in the mode of everyday wear. The relevance of the topic is due...