Control method for an autonomous group of multi-rotor aircraft
Journal Title: Modern Innovations, Systems and Technologies - Year 2024, Vol 4, Issue 1
Abstract
The purpose of this article is to improve the efficiency of control and monitoring of an autonomous group of multi-rotor aircraft by developing a hardware and software complex. The research is aimed at creating an intelligent system that will allow managing a group of drones for basing, data backup, charging on-board batteries, and assessing performance. The simplicity, diversity, good scalability of the design, ease of control, high maneuverability of multi-rotor systems have led to their widespread use. However, this type of design is not aerodynamically stable and for this reason requires an active stabilization system that would adjust the rotor speeds in real time. The developed software and hardware complex will allow you to control a group of multi-rotor aircraft by sending various commands. The developed system will allow automatic landing of a multi-rotor copter on a moving platform. In the course of the work, a general technique for controlling an autonomous group of multi-rotor aircraft was described, and a structural and graphic diagram of the stabilization system for an unmanned aerial vehicle was developed. The structure of information flows in the control system of unmanned aerial vehicles has been developed. The developed models will be used to build a simulation model, as well as in the direct development of the control system.
Authors and Affiliations
D. V. Starov, V. A. Koryakova
Keywords
Related Articles
- EP ID EP755327
- DOI 10.47813/2782-2818-2024-4-1-0110-0121
- Views 1
- Downloads 0
Comparative analysis of C++ and Java programming languages from the point of view of code safety assurance
A programming language is a set of commands that help computers, cell phones, tablets, and other electronic devices function as intended and perform various tasks. There are many types of programming languages, and choos...
Using inventory systems
This article examines the problem of the non-universal use of various types of inventory systems within the boundaries of the Organization’s information infrastructure, and also emphasizes the fact of the effectiveness o...
Parameters optimization of roller squeezing process of leather
The work is devoted to the optimization of the parameters of the roller squeezing of leather. Regression and empirical models of the residual moisture content of leather and the force of the squeezing process are determi...
Investigation of the process and apparatus for the final distillation of vegetable oil miscella on mathematical and computer models
With the development of computer technology, modeling technology and software, it becomes possible to widely use them in analytical studies of chemical and technological processes. The study of technological processes on...
Modeling a thin film printed inductance coil for a VHF radio receiver
When designing and modeling inductors, the only practical options are wire connections and flat geometric shapes, although, wire connections allow to achieve a high-quality factor, their inductance values are limited and...